UPS Shipping included CONUS with Address not PO Box! To PO Box Flat rate USPS service...outside of that contact me
Wampler Tape Echo - $150
Original Version Excellet condition in box slight tape residue on bottom should clean right off. Has original manual and rubber feet. Awesome sounding Tape modulation Echo
Lovepedal Les Lius Excellent w/ free velcro $110
Truly great Fender tweed tones Selling only because I built up a bunch of these in a smaller...
I was at Guitar Center at lunch today (North Dallas) to return something and saw the Limited Edition GC Exclusive MXR GCM66 Classic Overdrive Pedal behind the glass for $20.00 - NIB with all paperwork.
Are you kidding me? The retail price listed in the case was $99.00. I figure with three knobs and pots, the enclosure itself, jacks, and stomp switch all together, it is a fair enough deal just in spare parts. From what I have read though, it...
Im chasing one lousy knob for The Swedish Chainsaw, also known as the Boss HM-2 Heavy Metal.
Also after a replacement original pcb mount 250k dist. pot, or a source.
Happy to hear about HM-2 projects as well.
I have a dead mint '83 MIJ I scored for peanuts and I'd like to return it to original (missing knob and dist. pot is knackered).
Ta!
I'm liquidating my vintage EH collection after 25 yrs of collecting. I've made a list here and I welcome you to make a fair offer on any item(s) you find interesting. Please email me with your offers as it's quicker for me to respond.
The Bit Reactor is a downsampling / bit crushing effects pedal that takes any line-level input and turns it into a digital noisemaker. This is my original design and I've been so happy with the prototype that I've decided to do a small run of 10 pedals and release them to the world.
The Bit Reactor gives you control over both sampling frequency and bit depth. The 8 small LEDs surrounding the middle knob represent the number of bits being used; as the knob is turned clockwise, more bits are...
It's all in good to excellent condition and 100% functional. I'm happy to address any questions or concerns you may have. Prices include shipping and paypal. I'd prefer to keep in in the CONUS, but hey...everything is negotiable. Thanks for looking.
TC Electronic G Major. Very clean. No broken knobs. Very little rack rash. $150
Rocktron G612 line mixer. Very quiet. Functions perfectly. Bottom row of knobs is missing but the pots can still be turned. $70
XDR95 rackmount wireless receiver only....
I'm saving up for my Gonich demo build and I'd rather just sell stuff I have than beg for money online. I'd love to sell it here, rather than evilbay.
It's located in Montenegro (Europe). Paypal only. The shipping is an extra 20eur to Europe, 33eur to USA.
Price: 270eur
Imgur album:
The best sounding version of world's best analog delay. Barely used, as you can see. Has Velcro on the bottom (4 new rubber feet shipped with it). All original, fully working and sounding great!.
In excellent...
I'm saving up for my Gonich demo build and I'd rather just sell stuff I have than beg for money online. I'd love to sell it here, rather than evilbay.
It's located in Montenegro (Europe). Paypal only. The shipping is an extra 20eur to Europe, 33eur to USA.
Price: 180eur
Imgur album:
A rare 70s Shin-ei Fuzz Wah, made famous by The Jesus & Mary Chain. The fuzz circuit is the same one as in an Univox Superfuzz (used by The Who, Mudhoney, Electric Wizzard, and many more) and provides a unique,...
Hi everyone. I suggest you tap tempo control module for pt2399.
Ready to use, easy connect.
Dimensions (size PCB with components): 2,1 x 2,5 x 0,4 cm
Weigh no more than 20 g
Power supply: 9V
Current consumption: not more than 10-11 mA.
Impedance: 50k (also available at the user's discretion values 10k, 100k)
Min impedance (50k): 1,8 k
Max impedance (50k): 47,8 k
Number of stages: 50
LED Display error rate (analog mode): 20%
LED Display error rate (tap mode): 10%
Synchronized delay...
All of my PCB projects are on sale for 20% off this week. The sale price is applied automatically. Everything's in stock, including the Bluesbreaker (Cerulean) which had been out for awhile.
The Rixen effects pedal enclosure is designed specifically for enthusiast or professional effects pedal builders.
Features solid die-cast aluminium construction, large hinged pedal (activating a 4PDT switch with gold plated contacts for true bypass) and integral battery compartment (accessible from the top, and without using tools ! ).
I'm selling fully-stuffed PCB and pots. Quality workmanship and parts. Built w/ favored OP275 chip. Socketed LEDs to allow for experimentation. Works perfectly.
Selling an A/DA Flanger clone or will look at worthy trades / trades plus cash.
This is the daddy of all DIY flangers in my opinion. Sounds so great.
The enclosure size is (inches approx) 7 wide x 4.5 deep x 2.25 high
or in cm 18x11x5.5
Features:
- Moosapotamus PCB
- Panasonic MN3007 BBD chip
- ST and Ti chipset for the remainder
- +9v DC operation, LT1054 charge pump/7815 regulator internally for 15v operation
- Internal volume control potentiometer (can be set to unity or give a...
I have 3 Reticon SAD1024 BBD chips for sale. $40 each shipped CONUS. PayPal ok as a gift only. GeekMacDaddy, Culturejam, and Madbean, all know me from BYOC where I'm baj2k also.
I'm going to be selling my hardly used PCB making stuff as I don't have the room or space for it.
I've got a heated bubble etch tank, RRP £284, and it's this model
I also have a UV light tank, RRP £149, and it's this model
Both have only been used a few times, and in great condition. If I can find them, I also have inject printer sheets, and some laser printer sheets for the artwork.
RRP for both is £434, Looking to get £350 for both, but I'm open to offers. I would rather someone could...
I wanted to let everyone know about the availability of my DIY PCB projects starting today:
I have some pretty interesting ones that no one else is offering, such as the Korg SDD-3000 preamp and the Ibanez OD-820, as well as a few other really uncommon ones like the Ibanez OD-855 and Boss FA-1. I'm trying to find my niche with well-thought-out modifications & options and really good control layouts in a 1590B enclosure. Plus, who doesn't like colorful boards... anything but green!
Pre-Order Now! Kit will come with PCB and all required digital chips (2- Master, Slave)
Expected first shipment of: 6/1/13
EffectBlade is the very first and only DIY Programmable True Bypass Looper.
Features:
•6 mono loops
•2 stereo loops (end)
•2 amp controls
•8 presets per bank, 3 banks
•Ground Lift on each bank.
•3 operation modes (Override, Combination, Looper)
•Completely scalable! No need to build the whole thing out if you arent going to use them (I will provide guides on how to do...
In a couple of weeks I'm going to start selling PCB projects from my website, aionelectronics.com . They all fit in a 1590B with board-mounted pots and a top-mounted DC jack. The layouts are designed to be as flexible as possible, so you can build the core circuit or pretty much any variant that is based off of it, including Very Expensive™ stuff.
The order for the finalized PCBs has been placed, but I have prototype versions of most of them that differ slightly from the final version that I...
What are some good resources for learning how to play guitar solos? i know all of my basic chords, and i can read tablature, but i really want to learn more on my own. i am looking for some good, free online resources that give good guitar tutorials.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum