Anybody have an old parametric or semi parametric circuit laying around they would like to get rid of? I hope this isn't too off the DIY topic, but thought I might get away with it here.
I'm not looking for the stompbox it'self, just the prewired components. I've just gutted an older LP Artist, which now has plenty of room routed out (like enough for a tube amp) and would like to use a couple of concentric pots to control frequency and gain. Q pot could be internal, or possibly fixed....
I have (24) pedals I would like to sell. All of these work and are in Radio Shack black plastic boxes, DPDT switches (no LED'S), 9 volt battery snaps, and no knobs. They are:
Zendrive
BSIAB (original)
Sweet Thing
Box of Rock
Diefet
Okko Diablo
Krank
infinity
Thor
Purple Plexi
Dirty Little Secret
Stone Grey
Blue Magic
Plexiler
Pinnacle
Dr Boogey
Box of Metal
ODR-1
Crunch box
X2FET
Randall RG100
Triple Wreck
Plextortion
Blackstone MOSFET OD
I am thinking $300.00 for all (does not include...
Bogey posted this over at tagboardfx - Maplin are selling the Peak Atlas DCA55 semiconductor analyser for £19.99, less than half of the usual price. I tried click and collect, but my local store is of stock BUT they do free delivery in the UK. So if you always fancied one but couldn't justify the price, snap up a bargain before they're all gone.
Hello
In this post I want to sell some personal projects for guitar effects.
Tap Tempo for PT2399 delay
The board is adapts to any project with PT2399 . It is composed of a digital potentiometer (CAT5251) , a PIC16F1938 and a few passive components . Contact the board delay is via a double switch , as follows:
a row of contacts is to use genuine slider switch to digital potentiometer effect board on one side, and a potentiometer pointer normal to work in manual mode . The second row is used to...
Hi,
From the home of the Frog Tube Preamp PCB comes now, the Frog Jfet Buffer/Preamp PCB:
I just sent my second prototype version of the Tillman JFet preamp to fabrication. Within a few weeks I should have it back and tested. Assuming that will go well, I will then send out to production fabrication (in higher quantities) and sell on (where I am currently selling my Frog Tube Preamp PCB). As a reminder, the reason I designed this PCB is so I could mount the buffer/preamp in the body of a guitar...
I have a Honey Bee clone for sale, I just don't use it enough. I built this for myself not as a commercial clone. $100 plus shipping email me at fender686@yahoo.com I am located in Virginia, USA
Hello guys,
I've got lots of 3PDT true bypass wiring pcb's (based on Mr G's). Realized I don't need that much, so if you want to buy any feel free to pm me.
Price is 0.75$/piece + shipping from Israel (which should be cheap since it's small).
If you'll take 20+ shipping will be probably on me (depends where you're from).
Feel free to contact me.
A Tascam PS-P414 12v DC center positive power supply, pretty sure it's a 2.1 mm plug (fits pedals i've tried it on).
Output: + 12V DC, 650mA
A Sharper Image 12v DC center positive power supply, pretty sure it's a 2.1 mm plug (fits pedals i've tried it on).
Output: + 12v DC, 2.5A (model number KSAFE1200250W1US)
When I say I tried it on pedals, I simply plugged them into the jack of the pedal to see if they fit.
Looking for sale or trade; willing to end Reverb listings to make deals here.
Selling my beautiful handwired Dr. Z Carmen Ghia Clone.
Just a very fun amp to play. It reacts so predictably and really feels like an extension of your guitar.
Extremely easy to dial in great tones, and it takes pedals very well.
Gorgeous oak head cab.
Built with Hammond transformers.
- 2 x12ax7 preamp tubes
- 2 x EL84 power tubes
- 5y3 rectifier tube
Price Lowered: was 450.00 $400.00 obo (- ships from 84404, you pay shipping. )
Here's another new DIY project/circuit idea that I have come up with - The Xor'cist.
It's a glitchy and gated fuzz and a ring modulator. All CMOS based of course 8)
It also has a square wave LFO for some fun stuttering or alternating sounds.
I'm selling my personal full-tube preamp unit. The unit was made for my personal use but i'm putting it out now. The price is the same as the one for a full kit 110USD + Shipping (around 10USD).
Here are the features:
- full tube construction with 12AX7 tube (the unit is delivered with TAD tube)
- high voltage using SMPS (is not a starved plate design)
- based on Alembic F2B preamp (with some improvements: separate gain/volume controls and an optional output buffer - unit is delivered without...
Hello folks !
I hope it is ok to advertise here :) Here are my guitar fx PCBs. I can ship worldwide & secure with tracking number.
Shipping is 5€ for up to 4 pcbs. Feel free to contact me for heavier weight shipping at contact@stereomama.com.
They fit in a 1590B as seen in the photo.
It can be built several ways as seen in the layout image.
My version, built with negative ground (so it doesn't need a separate power supply) and most of Soulsonic's mods from is absolutely killer.
$8 each by Paypal includes free shipping to North American, Europe, Australia, Japan, and most places.
PM me or use
Putting this midget out for sale. It's a mini guitar amp of about 1W power.
Featuring a power stage with 6N16B and a preamp with 6N17B.
Volume control and bright switch. It's the first unit (001) that was build by me.
Output transformer is Hammond 125A.
The price for this one is 140USD plus shipping with tracking number (around 15USD).
It's a very nice clean amp, that can be used either at home or in studio...and look at the bright side, it goes up to eleven :D
Somethings have fell through recently so here's the chopping list, I mean shopping list....
Vox clyde reissue wah, with Area 51 buffer circuit, true bypass (of course) - asking 125$, ships in con US. will consider outside US but I will have to get a direct quote for the shipping.
Ernie Ball Music Man silent circuit (from the factory, but lost the original Ernie Ball packaging. comes with 250K pot and I have a wiring diagram from EB as well) 50.00
I'm selling (to finance other projects) the first unit of GTFO V2 (No. 001 with my signature - maybe someday it will worth something).
It's a full tube/high-gain/high-voltage (NOT starved-plate) guitar overdrive featuring 2 x 12AX7.
The high-voltage is made using a SMPS module.
Enclosure is 1590C, so for a 2 tube guitar pedal is very small. It's shipped with 2 x Ruby HG+ 12AX7 and also with wall-wart (12V @ 1.5A).
The price is 165USD (shipping not included) and comes with a full 1 year warranty...
i have for sale an original ROLAND AF100 BeeBaa from the 70's.
completely original and minty fresh!
i'm open to offers or trades for anything interesting but to be honest really need the cash!
can accept paypal or direct debit.
i also have some other pedals for sale,
OOHLALA XRAY OVERDRIVE, #38 boutique full range clean boost/ overdrive/ distortion can be used for bass or guitar, mint cond with original box & intructions.
LATE 60's JEN CRYBABY WAH, with red fasel inductor, (as used...
For sale rare vintage effect pedal made in 1981 in Soviet Union with fuzz, wah and tremolo effects. In great working order, although potentiometers could be replaced, but i thought that original ones would maintain it's originality (but can be replaced for new ones if desired). Jacks were modified to standard TRS and also the 9v power supply, no battery option.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum