Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.
I'm opening up this forum for people who want to get rid of some stuff they bought too much of. If I was hesistant about this initally, it was only because of the problems and altrication that might come from this, rather than this idea of members helping out one another.
Rules & Guidelines
:arrow: Mark your subjects with 'for sale', 'for trade' (or both) and a clear description of the part/component.
:arrow: Keep messages and threads updated as to the status of the transaction.
:arrow:...
G'day all
The supplier I use for semiconductors in another state(Aus) has informed me that they will no longer
be stocking 2n5088 and 2n5457. As I've not built too many pedals/gadgets/amps etc. I'm not sure how many of these I'm likely to need. I plan to try quite a few different projects so I wonder what yo guys think. Are these commonly used parts? Should I stock up on these so I don't have to purchase from O/S.
Has anyone seen blue CF25 carbon film resistors before? I wanted to stock up on some cheapy carbon films and bought 1000 from an eBay dealer in China. They were described as CF but the image showed a pack of blue resistors so I emailed him first to check that they were actually carbon film. He replied that they were and so I thought he must have just used any old resistor photo he had to hand. When they arrived they were blue but a slighter darker and more translucent blue when compared to the...
sorry for the nooby-like question.
But I can't find the 1N34A germanium diode that I'm looking for at small bear.
I've got a big order ready to ship, but I need this one component for my Tycobrahe clone from GGG.
Is there a working replacement to be found at small bear?
hi guys i'm looking for a diefet pedal ..the projet is way to advance for me ..and i really like the pedal so if anybody is interesting in sale a diefet or build me one i will really appreaciate ..
thanx for the support
can contact me at pablo_juan@sbcglobal.net
i'm trying to find some knobs like these or equivalent modern makes-
i know somebody is making them somewhere because behringer is using them on their mic pres ala-
i've looked all over, and they are either super expensive NOS, or used on ebay. and i know behringer isn't using NOS knobs on their mic pres! i've got some big boxes and need to fill up some room, thought these might look cool.
I usually order all my parts from Small Bear, Mouser, or Dig-Key. I was wondering if any one knows of any other shops like small bear? ie. more of a specialty shop. If so post a link.
Thanks
A buddy of mine in France or the UK (not sure where he's hanging out at the moment) needs some 2N3565 trannies. Anybody know where to get some? Thanks for reading.
I have 3 sets of:
- AL1101
- AL1201
- AL3201B
... Wavefront semi ICs (SOIC), all fresh in anti-static tubes. I think there's a 'Femtoverb' project or something that you can build with them. Have had these for four years, time for a cleanup. US$15 a set including international postage sound fair? Paypal only - PM me. Ta! :thumbsup
This meter is USED and has a few scuffs and scratches. It is around 2 years old but is in good working condition. Hhe meter comes with 2 test leads, 2 screw on alligator clips and the manual.
Sale price $15.00 USD + actual shipping charges, Paypal, money order or cashiers check. Trade? Make an offer almost any misc. stomp box or amp stuff.
gidday there all.
i've started putting pedals into 1590b enclosures and have kinda hit a snag.
I like my pedals to have all the i/o/dc at the top end so the cables can loop and I can snugly line the pedals up beside each other with no gaps.
the end of the 1590b does not leave a lot of room for 2X phono jacks and a dc jack :x .
so does anyone know which are the 'thinnest' jacks (at a reasonable price) to use?
anyone tried these?
I've been using the horizontal Alpha 9mm pots in the past and they have been great. I do however need vertical pots for my next project and all I can find is vertical PC mount pots with 5mm lead spacing. Are any pots being made with 2.5mm lead spacing and vertical PC mount?
I'd prefer not to order from Mouser as they charge millions for international shipping. A European store would be the best but anything works as long as international shipping won't be too expensive.
hey, do any of you guys have a .01uf cap (greenie, metal film, box) they can send me?
i really wanna finish modding my RAT, but realized i ran out of parts. i really want to finish it, but i just don't have the money to run a parts order right now.
Looking for an op-amp for a MXR distortion +. I bought one off ebay as a fix it pedal, and it had a missing switch and missing op-amp. I am kinda new to the whole pedal building thing and wanted to try just to fix a pedal first.
Can anyone help me find the right op-amp (or one that might work better)?
The one in the pic says:
HM84AD
LM
741CN
Also, is there a specific switch I need to mount on the PCB? Thanks a lot!!
Here is a pic of a stock pedal board if it helps:
Looking to buy an 18vDC power supply, UK plug, hopefully to fit 2.1mm DC jack, don't mind about polarity as I havn't wired my project up yet, and a decent one to boot :)
Can't seem to find one ANYWHERE :cry:
I know there are Dunlop's ECB-004UK, which would be perfect, but no where to be seen at all with UK plug :hmmm:
Hey guys. What do you recommend for a good supplier for BC109's. I can't seem to find any Motorola parts out there. Are the Multicomp BC109's any good? How many should I be prepared to buy to get a few within the right tolerances? I'm out to build up a couple colorsound overdrives.
The input level of my Akai Deep Impact came loose so I opened her up; the potmeter is broken from the base. I now need a replacement.
Anyone knows a source to get these in Europe?
From the ALPS site:
model: RK09L1140 F15 C0 A104 aka 100k A potmeter, 15mm shaft, no center dent, 9mm potmeter. Vertical mount.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum