Page 1 of 1
Yamaha - E1010 Analog Delay [schematic]
Posted: 28 Dec 2010, 17:10
by KHELSTROM
Here's a schematic I have of the rackmount Yamaha E1010 analog delay. It's split into two images and the resolution isn't the best. If anyone has a larger/ higher res. copy please post.
Re: Yamaha E1010 Analog Delay
Posted: 30 Dec 2010, 22:07
by Dirk_Hendrik
Nothing as unrewarding as posting something that is worth looking at and getting 0 response.
Thanks. I had these already but that's of no concern.
Comments?
Yes! Take a look at the LFO section for the modulation. At the end there's a hypertriangular conversion of the waveform. The 1010 was the first effect unit where I saw this put in practice.
Hypertriangular!?
Hammer.ampage.org and look for the Hypertriangular articles.
Re: Yamaha E1010 Analog Delay
Posted: 30 Dec 2010, 22:24
by lolbou
Dirk_Hendrik wrote:something that is worth looking
I did look. But I hardly see something I recognize well... Oh, yes, there are transistors!
Dirk_Hendrik wrote:I had these already but that's of no concern.
Any chance of higher resolution ones?
Dirk_Hendrik wrote:At the end there's a hypertriangular conversion of the waveform. The 1010 was the first effect unit where I saw this put in practice.
Now off I go googling for it...
Re: Yamaha E1010 Analog Delay
Posted: 04 Feb 2011, 10:09
by marmaliser
I have one of these on the way. Any interest in gut shots?
Re: Yamaha E1010 Analog Delay
Posted: 04 Feb 2011, 13:57
by fosnal1950
Yes, please do, could you make the shots hi quality ? I'm very interested.
Alf
Re: Yamaha E1010 Analog Delay
Posted: 19 Feb 2011, 16:39
by marmaliser
Re: Yamaha E1010 Analog Delay
Posted: 20 Feb 2011, 10:07
by stonefreed
Thanks a lot , very informative pics. I 've always thought this delay sounded terrific !
Re: Yamaha E1010 Analog Delay
Posted: 25 Jun 2012, 17:49
by rizibiz
Guys, sorry for resurrecting this ancient thread. A buddy of mine has one of these in his possession and I think it sounds fabulous.
I was asked to make him a footswitch for it. Am I right (according to the schematic) that I can use a simple SPST latching footswitch connected through a mono jack?
Thanks!
Re: Yamaha E1010 Analog Delay
Posted: 25 Jun 2012, 17:58
by Dirk_Hendrik
Yep. Sure looks like it. It just mutes the signal going to the delay lines.
Re: Yamaha - E1010 Analog Delay
Posted: 03 Feb 2019, 16:17
by uncleboko