KORG schematics
Hi guys.
I finally managed to find and scan my collection of the good old KORG schematics.
If You click the 4shared link You will find the schematics of :
Overdrive OVD-1 , Hard Distortion DST-3 , Chorus CHR-1, Limiter LIM-1 , Flanger FLG-1 , Parametric EQ PEQ-1 ,Compressor CMP-1 , Tone Booster TNB-1 , Phaser PHS-1 , Noise Gate NGT-1 and Octaver OCT-1.
https://www.4shared.com/account/home.jsp#dir=FET_lXPf
Have a fun
I finally managed to find and scan my collection of the good old KORG schematics.
If You click the 4shared link You will find the schematics of :
Overdrive OVD-1 , Hard Distortion DST-3 , Chorus CHR-1, Limiter LIM-1 , Flanger FLG-1 , Parametric EQ PEQ-1 ,Compressor CMP-1 , Tone Booster TNB-1 , Phaser PHS-1 , Noise Gate NGT-1 and Octaver OCT-1.
https://www.4shared.com/account/home.jsp#dir=FET_lXPf
Have a fun
- Nocentelli
- Tube Twister
Information
- Posts: 2222
- Joined: 09 Apr 2009, 07:06
- Location: Leeds, UK
- Has thanked: 1152 times
- Been thanked: 954 times
Christ! I had a Korg "Hard Dist" when I was about 18, perhaps the most repellant filth pedal I have ever tried before or since, with an utterly unusuable tone control that went from super-muffled to "aaaaghh, my cochlear has ripped open" in less than a degree of rotation. Cheap looking boxes, but actually really solidly built. Not sure what happened to it, in no hurry to build another...
modman wrote: ↑ Let's hope it's not a hit, because soldering up the same pedal everyday, is a sad life. It's that same ole devilish double bind again...
I believe that clip2net links will be much easier to download :
Overdrive OVD-1 http://clip2net.com/s/5M3i1H
Hard Distortion DST-3 http://clip2net.com/s/5M3ntx
Chorus CHR-1 http://clip2net.com/s/5M3sEs
Limiter LIM-1 http://clip2net.com/s/5M3umt
Flanger FLG-1 http://clip2net.com/s/5M3wi5
Parametric EQ PEQ-1 http://clip2net.com/s/5M3y5v
Compressor CMP-1 http://clip2net.com/s/5M3A4y
Tone Booster TNB-1 http://clip2net.com/s/5M3BpY
Phaser PHS-1 http://clip2net.com/s/5M3CU1
Noise Gate NGT-1 http://clip2net.com/s/5M3G0E
Octaver OCT-1 http://clip2net.com/s/5M3Jhk
Overdrive OVD-1 http://clip2net.com/s/5M3i1H
Hard Distortion DST-3 http://clip2net.com/s/5M3ntx
Chorus CHR-1 http://clip2net.com/s/5M3sEs
Limiter LIM-1 http://clip2net.com/s/5M3umt
Flanger FLG-1 http://clip2net.com/s/5M3wi5
Parametric EQ PEQ-1 http://clip2net.com/s/5M3y5v
Compressor CMP-1 http://clip2net.com/s/5M3A4y
Tone Booster TNB-1 http://clip2net.com/s/5M3BpY
Phaser PHS-1 http://clip2net.com/s/5M3CU1
Noise Gate NGT-1 http://clip2net.com/s/5M3G0E
Octaver OCT-1 http://clip2net.com/s/5M3Jhk
A long time ago I even made the Overdrive and Hard Distortion clones.Nocentelli wrote:Christ! I had a Korg "Hard Dist" when I was about 18, perhaps the most repellant filth pedal I have ever tried before or since, with an utterly unusuable tone control that went from super-muffled to "aaaaghh, my cochlear has ripped open" in less than a degree of rotation. Cheap looking boxes, but actually really solidly built. Not sure what happened to it, in no hurry to build another...
Overdrive was much better but as far I remember the sound of the Hard Distortion could have been improved with a couple of mods.
Schematic shows that it is quite similar to Boss DS-1.
I got this beautiful little thing the other day that I haven't found elsewhere and I know someone out there will find it useful so I have to put it out there.
It's a complete collection of service manuals for the following Korg effects from the 80's
This includes schematics, parts lists, exploded view, calibration, etc...
Korg CHR-1 Chorus
Korg CMP-1 Compressor
Korg DST-1 Distortion
Korg DST-3 Hard Dist
Korg FLG-1 Flanger
Korg LIM-1 Limiter
Korg NGT-1 Noise Gate
Korg OCT-1 Octaver
Korg OVD-1 Over Drive
Korg PEQ-1 Parametric EQ
Korg PHS-1 Phaser
Korg TNB-1 Tone Booster
It's a complete collection of service manuals for the following Korg effects from the 80's
This includes schematics, parts lists, exploded view, calibration, etc...
Korg CHR-1 Chorus
Korg CMP-1 Compressor
Korg DST-1 Distortion
Korg DST-3 Hard Dist
Korg FLG-1 Flanger
Korg LIM-1 Limiter
Korg NGT-1 Noise Gate
Korg OCT-1 Octaver
Korg OVD-1 Over Drive
Korg PEQ-1 Parametric EQ
Korg PHS-1 Phaser
Korg TNB-1 Tone Booster
- Dirk_Hendrik
- Old Solderhand
Information
- modman
- a d m i n
Information
- Posts: 4890
- Joined: 19 Jun 2007, 16:57
- Has thanked: 4394 times
- Been thanked: 2131 times
I merged this with an older thread on the subject, which immediately revealed these were published earlier, all links above are dead.
I am in the process of splitting out the pdf into pdf's per effect, to publish them in the correct thread.
So we don't we lose them again...
I am in the process of splitting out the pdf into pdf's per effect, to publish them in the correct thread.
So we don't we lose them again...
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal
This thread led me to the board while searching for schematics for the CHR-1. Bought one cheap on ebay last year and it's a little scratchy at times and cuts my single WAY more than I would ever expect a Korg product to do, even a guitar one from the 80s. Guessing this will be my first attempt at a repair job, so very grateful to find this post! Thanks!
Now with any luck I would don't any further damage...haha!
R2
Now with any luck I would don't any further damage...haha!
R2