Page 1 of 1

Zoom - UF-01 Ultra Fuzz

PostPosted: 14 Nov 2013, 22:15
by destro
I think this was floating around at some time and was hoping that someone might have saved it to their hard drive. If so and you can send to me, I'd be very grateful! Thanks!!

Re: Zoom UF-01 Ultra Fuzz Schematic

PostPosted: 25 Dec 2013, 22:30
by mirosol
...Or better yet, post in on the forum. I've been after this one for a while too.

Re: Zoom UF-01 Ultra Fuzz Schematic  [schematic]

PostPosted: 06 Feb 2017, 19:27
by whoisrobmay
I recently came across the fantastic FacelessFX's Facebook page, and a while back Tim had traced and messed around with the UF-01. He posted a video of what he did here (https://youtu.be/4HfPtnjB4IA). I reached out to him and he was nice and gracious enough to send over the original schematic he traced out! So here it is attached to this post, let me know if there are any issues and I can post a dropbox link too.

Major thanks to Tim for tracing and sharing it! Now to figure out what changes he made... :lol:

Re: Zoom UF-01 Ultra Fuzz Schematic

PostPosted: 17 Jun 2017, 12:24
by HamishR
I found a schematic for it on DIY Stompboxes but haven't been able to find a vero layout - I'm not equipped to design them myself! Not sure if it's cool to post a link but it's easy enough to find. I have an ultrafuzz and would LOVE a layout so I could play around with mods to it. I always thought of it as a more usable Fuzz Factory.

Re: Zoom UF-01 Ultra Fuzz Schematic

PostPosted: 17 Jun 2017, 16:05
by Jan1966
There probably wont be a layout on vero as it is huge schematic. Do you want to have a go?

Re: Zoom UF-01 Ultra Fuzz Schematic

PostPosted: 18 Jun 2017, 16:45
by HamishR
If it would fit in a 1590 B or BB I would. I didn't realise it was a huge circuit. I'm more used to amps than pedals - pedals are hard compared to amps!

Re: Zoom UF-01 Ultra Fuzz Schematic

PostPosted: 19 Jun 2017, 04:25
by whoisrobmay
I think the original had a bunch of SMD components, and it was even still bigger than a 1590B. I can't promise it soon as I have a few other things on the list first, but I'm going to get a perf layout done, and try and condense it as I can. No promises, but I want one of these on my board too, so I'll make something happen eventually...