attention! there is a mistake on this schematic, so there is a mistake on the layout too...
the circuit round tone control, should be like a big muff's tone control..from c21 we should go to era pin3 and from era pin2 to the 10k resistor.
i've build the Silver Blues's layout above, and it worked, but didn't sound as good as in the demos. my friend that i build it for sent it back to me to see if i can make it bassier, and then i saw that the tone control part was similar to a B.M.'s. i immediately made the changes i suggested above and boom! sounds great! after that, i've build 2 more boards with an other layout i drew that allows a 1590b. So here is my layout. Verified
You do not have the required permissions to view the files attached to this post.
- For this message the author ksenanekro has received thanks: 8
- FUZZZZzzzz (10 Apr 2017, 19:37), Intripped (06 Apr 2017, 21:35), johnk (12 Apr 2017, 05:03), lohstah (07 Apr 2017, 09:03), ozzy666 (06 Apr 2017, 13:43), Silver Blues (06 Apr 2017, 17:27), stangwarrior (12 Apr 2017, 11:24), tp801 (06 Apr 2017, 16:08)