freestompboxes.org

MINI Tube Screamer guts & schematic

Cute pedal

Big thanks for one more contribution

Here is my version of this Screamer designed for SMD technology. Pots and switch are on the other side of Pcb, DC jack and input/output jacks are mounted directly on 1590A housing.

I think the resistor values R10 and R11 must be swapped (R10=1k, R11=220). You can once again verify the original TS MINI?

Ixide wrote:I think the resistor values R10 and R11 must be swapped (R10=1k, R11=220). You can once again verify the original TS MINI?

I don't think so.

Thanks for the answer.
Strange that the developers have swapped value resistors. Here for example the old original scheme.
See R108 = 220 (for tone) and R111=1k

This is a thread I missed completely. Thanks Apollo! Also thanks Ixide for noticing this error. Makes one wonder if someone made a f-up with the BOM.

Dirk_Hendrik wrote:This is a thread I missed completely. Thanks Apollo! Also thanks Ixide for noticing this error. Makes one wonder if someone made a f-up with the BOM.

or the pick and place machine had the wrong reel loaded that day.

true

Hi everyone, maybe somebody knows where i can find a tone knob replacement for the tube screamer mini?

thanks very much

I think you will find there is no Knob as such, the shaft is the knob. So if it's broken/damgaed then you will have to replace the whole pot.
Phil.

phatt wrote:I think you will find there is no Knob as such, the shaft is the knob. So if it's broken/damgaed then you will have to replace the whole pot.
Phil.

hi Phil thank you very much for your response. Any place where i cand find that exact pot? in the piece it says GC203W and it has the brand ALPS on it. I did try to google it and search for it in the alps web but didn´t have any luck.

thank you

Any one knows something about it?

thanks

It's a 20K pot made by Alps.

Check Digi-key or Mouser for mini pots like that, standard PC mount.

thank you very much drewl.

Anyone know what the exact diodes are?