Page 5 of 5
Re: EH - Wiggler
Posted: 17 May 2010, 00:33
by kreeper_6
O.K.
So how do I remove the tubes from this circuit?
Re: EH - Wiggler
Posted: 20 May 2010, 16:42
by devastator
take off the black stuff (with screwdrive) , then you pull the tubes , softly , doing a litle movement form right to left. They come easily.
Anyway, I had to fix mine again. The wire of the weird dc jack was broken. I have , also, to put new led holder .
Why EHX stuff are so crappy ?
Re: EH - Wiggler
Posted: 01 Jan 2011, 18:12
by monkmiles
Bumping an old thread. But anyone else try this mod to the rate knob to make it more usable? It's very sensitive and gets too fast in my opinion.
station wrote:
Oh, and one improvement that I made (besides dropping the whole pedal in acid to etch the finish off
) was to to put a 100 ohm resistor between legs 1 and 2 of the rate knob. Made the usable range go from 8 o'clock to 3 instead of 8 - 10 or 11. A very easy mod that makes this pedal way more enjoyable to play.
Re: EH - Wiggler
Posted: 01 Jan 2011, 18:23
by devastator
changing the pot is the best option . I can try putting in // or serie a resistor but I gonna play also on the curve.
Mine was a real nightmare to set because of this pot and when I watched the "pulsar" vids that was the same kind of issues with its rate control (why EHX always does that ? )
Re: EH - Wiggler
Posted: 02 Jan 2011, 00:18
by Fredenando
Re: EH - Wiggler
Posted: 02 Jan 2011, 10:29
by borislavgajic
Thank you very much..........where did you get this schem? it was missing from that EH files....
Boris
Re: EH - Wiggler
Posted: 02 Jan 2011, 14:46
by Fredenando
Hello Boris, here is where I have found it:
http://music-electronics-forum.com/t16589/
Re: EH - Wiggler
Posted: 02 Jan 2011, 16:00
by borislavgajic
Thanks for info!
Boris
Re: EH - Wiggler
Posted: 06 Mar 2011, 08:09
by kreeper_6
devastator wrote:take off the black stuff (with screwdrive) , then you pull the tubes , softly , doing a litle movement form right to left. They come easily.
Anyway, I had to fix mine again. The wire of the weird dc jack was broken. I have , also, to put new led holder .
Why EHX stuff are so crappy ?
Haha, Nah I meant literally taking the Valves and transformer out of the circuit/schematic altogether.
Re: EH - Wiggler
Posted: 06 Mar 2011, 10:30
by borislavgajic
you have mqany articles about that ....mostly simulating tube preamps with FET-s ....but why do that? point of this thread is to make TUBE Wiggler
cheers
Boris
Re: EHX - Wiggler
Posted: 17 Jan 2018, 12:23
by clintrubber
FWIW, inside pic of the related/almost identical Nady TTV-2 added to this thread:
https://www.freestompboxes.org/viewtopic ... dy#p172566
Re: EH - Wiggler
Posted: 17 Jan 2018, 20:08
by clintrubber
Anybody still has this file somewhere ? Seems to be gone from imageshack after all those years.
Thanks!
Re: EHX - Wiggler
Posted: 16 Dec 2021, 15:09
by modman
I re-attached the schematic to the first post of the thread.
I did found Puretube recently necro-trolling (!) only to hear the schematics are shared by New Sensor these days...
Re: EHX - Wiggler
Posted: 16 Dec 2021, 15:10
by modman
I re-attached the schematic to the first post of the thread.
I did found Puretube recently necro-trolling (!) only to hear the schematics are shared by New Sensor these days...
https://music-electronics-forum.com/for ... schematics