Mooer Tender Octaver guts

All about modern commercial stompbox circuits from Electro Harmonix over MXR, Boss and Ibanez into the nineties.
Post Reply
User avatar
apollomusicservice
Resistor Ronker
Information
Posts: 338
Joined: 04 Jun 2012, 11:54
Has thanked: 65 times
Been thanked: 828 times
Contact:
Contact apollomusicservice

Post by apollomusicservice »

Just for info Mooer Tender Octaver.
Attachments
01.jpg
02.jpg
Top
User avatar
newly
Breadboard Brother
Information
Posts: 69
Joined: 31 Oct 2009, 09:55
Has thanked: 3 times
Been thanked: 2 times

Post by newly »

it is 3 pcs of pcbs stacked togethers with header pins.
Basically not possible remove each pcb without damaging current component.
Top
User avatar
Ice-9
Degoop Doctor
Information
Posts: 1094
Joined: 31 Mar 2009, 15:29
my favorite amplifier: Marshall
Completed builds: Far to many to afford the enclosures for them all. :)
Has thanked: 134 times
Been thanked: 359 times
Contact:
Contact Ice-9

Post by Ice-9 »

newly wrote:it is 3 pcs of pcbs stacked togethers with header pins.
Basically not possible remove each pcb without damaging current component.
It is easy enough to part the pcb's with either solder braid or a solder sucker, both will do the job :secret: Those little Mooer pedals are quite good value, you get a lot for the cost.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?
Top
Post Reply

Return to “Modern Stompbox Effects (1975 - ...)”