EBS - Multicomp [schematic]
- goaltoday
- Breadboard Brother
Some pics of another great compressor, the EBS multicomp. Unfortunately all SMD.
https://img251.imageshack.us/img251/265 ... 366xf0.jpg
https://img265.imageshack.us/img265/600 ... 367im8.jpg
https://img50.imageshack.us/img50/822/dscf0370sf2.jpg
https://img204.imageshack.us/img204/562 ... 372sa8.jpg
https://img251.imageshack.us/img251/265 ... 366xf0.jpg
https://img265.imageshack.us/img265/600 ... 367im8.jpg
https://img50.imageshack.us/img50/822/dscf0370sf2.jpg
https://img204.imageshack.us/img204/562 ... 372sa8.jpg
Last edited by goaltoday on 27 Aug 2007, 20:17, edited 2 times in total.
- goaltoday
- Breadboard Brother
Dammit! I've just opened it and ... SMD everywhere.
This is a poor quality webcam picture because I think it's worthless. But if someone is still interested I can take some quality ones.
https://img215.imageshack.us/img215/509/ebsjv5.jpg
This is a poor quality webcam picture because I think it's worthless. But if someone is still interested I can take some quality ones.
https://img215.imageshack.us/img215/509/ebsjv5.jpg
- Goop_buster
- Solder Soldier
A guess is that it is a two-band compressor using (what looks like) 2 * SSM 2166 in SO14 package (or some similar comp in a chip)
- goaltoday
- Breadboard Brother
Tomorrow I leave on holidays but next week I'll take some pictures. For curious people.
Visible ICs are: 2xLM833 and 2x TL064. There's another "hidden" below the a pot but I believe it's another TL064.
Visible ICs are: 2xLM833 and 2x TL064. There's another "hidden" below the a pot but I believe it's another TL064.
- goaltoday
- Breadboard Brother
Sorry for the (long) delay!
Some months ago I took better pictures but new work, moving to another house , girlfriend,.. it's been impossible to publish them.
Also I found it's difficult to desolder some parts but I'll try again.
Thanks for your patience.
Bye!
Some months ago I took better pictures but new work, moving to another house , girlfriend,.. it's been impossible to publish them.
Also I found it's difficult to desolder some parts but I'll try again.
Thanks for your patience.
Bye!
- lolbou
- Old Solderhand
Thanks for your efforts and cheers for the busy life!goaltoday wrote:Sorry for the (long) delay!
Some months ago I took better pictures but new work, moving to another house , girlfriend,.. it's been impossible to publish them.
Also I found it's difficult to desolder some parts but I'll try again.
Thanks for your patience.
Bye!
- Are you a mod or a rocker?
- Uh, no, I'm a mocker.
- Uh, no, I'm a mocker.
- Brink
- Degoop Doctor
We definitely appreciate whatever contributions you can make!goaltoday wrote:Sorry for the (long) delay!
Some months ago I took better pictures but new work, moving to another house , girlfriend,.. it's been impossible to publish them.
Also I found it's difficult to desolder some parts but I'll try again.
Thanks for your patience.
Bye!
- chicago_mike
- Tube Twister
If we can get a schematic then we'll have 3 ebs pedals to build!
Skyline FX 2013
- Jarno
- Resistor Ronker
Information
- Posts: 363
- Joined: 12 Nov 2008, 10:18
- my favorite amplifier: Something nice
- Completed builds: Alembic-like state-variable and sallen-key filter preamps
Lovepedal Eternity
Phase 100
Brown source
Fuzz Face
Flipster
Alembic F2B (tube preamp)
Opamp and FET buffers
Loads of speakercabinets and ampracks
Busy building a modular synth (ssm2044 vcfs, preamps, ADSR's, VCO's, VCA's)
Tables
Bookshelves
Basses
So many things! :D - Location: Rosmalen, NL
- Has thanked: 27 times
- Been thanked: 81 times
Of which other EBS pedals are schematics available?
"It crackles....., but that's ok"
- chicago_mike
- Tube Twister
Octabass and bassiq
Skyline FX 2013
- chicago_mike
- Tube Twister
If we can get some real clean close p shots I think I can trace this. (multi-comp) or if someone has one, maybe they can email ebs to get a schematic?
Skyline FX 2013