Is there a ts9 mod like this?

A forum devoted to mod, tips and suggestions for upgrading and rehousing your VERY CHEAP commercial stompbox to near boutique excellence.

Is there a ts9 mod like this?

Postby Sirshredalot » 10 Feb 2018, 00:30

Hello all, first post

Right to the point.
Is there a way to mod a ts9 so that no clean signal comes through?
Please and thank you
God bless
Shred
Sirshredalot
 
Posts: 2
Joined: 10 Feb 2018, 00:24
Has thanked: 0 time
Have thanks: 0 time

Re: Is there a ts9 mod like this?

Postby phatt » 10 Feb 2018, 01:29

Yep,, just turn the gain up full. :thumbsup
Phil.
phatt
Diode Debunker
 
Posts: 982
Joined: 04 Aug 2010, 06:17
Location: Morayfield SE Qld AU
Has thanked: 0 time
Have thanks: 236 times

Re: Is there a ts9 mod like this?

Postby Dirk_Hendrik » 10 Feb 2018, 10:44

Like Phatt says.
Or, essentially, even easier. Just keep it stock. There is no mixing stage or similar where dirty and clean are mixed or something. Therefore, when engaged, all signal is dirty. It's just not dirty enough for your taste I'm afraid.
Sorry. Plain out of planes.

http://www.dirk-hendrik.com
User avatar
Dirk_Hendrik
Old Solderhand
 
Posts: 4164
Joined: 03 Jul 2007, 09:44
Location: Old Amsterdam
Has thanked: 250 times
Have thanks: 1002 times

Re: Is there a ts9 mod like this?

Postby paulc » 11 Feb 2018, 17:03

One thing I like to do to them is to convert the clipping opamp into an inverting stage. This will cut the clean bleed way back. It can be a little tricky to do, but pretty easy in the ts10 and takes just minutes in the EH East River. A little more saturation, compression, and less "clutter" in the low end. A slight loss in volume and attack because the clean transients are not coming through. It's easy to get the volume back with a tweak to the diode clamps.
paulc
Resistor Ronker
 
Posts: 318
Joined: 08 Nov 2007, 00:42
Has thanked: 2 times
Have thanks: 49 times

Re: Is there a ts9 mod like this?

Postby Sirshredalot » 14 Feb 2018, 10:34

Thanks for all the replies.

Im a rookie at pedal mods, do you have a schematic or intructions for that mod?
I can solder.

Please and thank you
God bless
Shred
Sirshredalot
 
Posts: 2
Joined: 10 Feb 2018, 00:24
Has thanked: 0 time
Have thanks: 0 time

Re: Is there a ts9 mod like this?

Postby paulc » 14 Feb 2018, 20:51

Sirshredalot wrote:Thanks for all the replies.

Im a rookie at pedal mods, do you have a schematic or intructions for that mod?
I can solder.

Please and thank you
God bless
Shred


I can't get a pic to post... :scratch:
paulc
Resistor Ronker
 
Posts: 318
Joined: 08 Nov 2007, 00:42
Has thanked: 2 times
Have thanks: 49 times

Re: Is there a ts9 mod like this?

Postby bugg » 17 Feb 2018, 02:37

I prefer to replace the clipping diodes with 3mm red LEDs....
bugg
Breadboard Brother
 
Posts: 94
Joined: 11 Feb 2013, 04:10
Has thanked: 30 times
Have thanks: 214 times


Return to Pimp-My-Cheap-Pedal

Who is online

Users browsing this forum: bigbann99 and 3 guests