MOD IDEA: would this make negative feedback of boss BF-2?

A forum devoted to mod, tips and suggestions for upgrading and rehousing your VERY CHEAP commercial stompbox to near boutique excellence.
Post Reply
User avatar
scoop
Breadboard Brother
Information
Posts: 55
Joined: 28 Jul 2011, 22:35
Has thanked: 2 times
Been thanked: 1 time

Post by scoop »

this is the full schematic

I figure this is the last opamp (buffer?) before the delay line goes to the resonance knob.
Image
If I simply find a way to swap pins 2 and 3 of IC2 would that make the signal inverse?

Thanks for any advice!

User avatar
phatt
Transistor Tuner
Information
Posts: 1224
Joined: 04 Aug 2010, 05:17
Location: Morayfield SE Qld AU
Has thanked: 8 times
Been thanked: 343 times

Post by phatt »

Short answer,, NO.
longer answer; Quick fix mods without a deep understanding of how something works will just lead to tears.
Messing with pcbs is the fastest way to destroy a good working pedal.
If you want to fiddle with this circuit buy the parts and breadboard your dreams. :wink:
Phil.

User avatar
scoop
Breadboard Brother
Information
Posts: 55
Joined: 28 Jul 2011, 22:35
Has thanked: 2 times
Been thanked: 1 time

Post by scoop »

well luckily there is a bit of room in the BF-2, I could possibly fit a daughter board in that inverts in the path of the resonance

User avatar
marshmellow
Cap Cooler
Information
Posts: 469
Joined: 16 Aug 2007, 07:31
Location: Germany
Has thanked: 19 times
Been thanked: 127 times

Post by marshmellow »

In addition to what Phil said: you can't change the polarity of the signal at that point. It would upset the phase relation of the mixer in front of the BBD, as well as the mixer of clean signal and effect signal at the output.

Post Reply