a few builds offered (FS/T)
- LaceSensor
- Cap Cooler
See the pics here http://www.madbeanpedals.com/forum/inde ... pic=8002.0
All clones made by yours truly.
Memory Man
Tap Tempo Trem
DAM Zeke-a-like
FOXX tone machine
Aqua Puss
All clones made by yours truly.
Memory Man
Tap Tempo Trem
DAM Zeke-a-like
FOXX tone machine
Aqua Puss
- Nocentelli
- Tube Twister
Information
- Posts: 2222
- Joined: 09 Apr 2009, 07:06
- Location: Leeds, UK
- Has thanked: 1155 times
- Been thanked: 954 times
Damn, was hoping there'd be some Lovetone goodness up for grabs
modman wrote: ↑ Let's hope it's not a hit, because soldering up the same pedal everyday, is a sad life. It's that same ole devilish double bind again...
- Greg
- Old Solderhand
Pics aren't viewable unless you're a member.
culturejam wrote: We are equal opportunity exposure artists.
- LaceSensor
- Cap Cooler
Not really got a use for this right now.
MN3005 dirtbag. 330pF clock capacitor for about 800ms of delay (quiet, but evident, clock whine kicks in after about 500ms as you'd expect) - socketed so you can sub in 220/240pF instead.
Runs off 9v DC tip-ve, internally Road-Raged up to a stable 15v
Biased as per the docs sounding lovely and trim'd for "edge of runaway" feedback.
Labour of love and not looking to give it away.
Will entertain trades of a similar DIY calibre, or commercial.
Im in the UK...
---------------------------------------------------------------------------------
FOXX Tone Machine clone, Wolfshirt board.
1n34a's. Sounds soooo nasty. Bicolor LED, dual footswitchable modes
---------------------------------------------------------------------------------
Way Huge Aqua Puss mk1 clone, with MN3005 chip.
The holy grail in my opinion, and many others. I love this pedal. But I have 2. And the means to make 2 more, so....
old gutshot, has shielded ins and outs now...
---------------------------------------------------------------------------------
Tap Tempo Tremolo
Taylors Musicpcb.com project. Simply put the best trem out there, and lots of boutweeks are just using the exact same architecture as far as I can see.
---------------------------------------------------------------------------------
DAM Ezekiel-ish clone
4 mode overdrive distortion loosely based on the rat. I didnt use the same clipping diodes as the original for the Ge mode - I used 1n60p's IIRC... Graphics are peeling at the edges (decals) and can/will be redone in monochrome.
Open to offers and trades
Prices:
Memory Man - £160
Tone Machine - £45
Aqua Puss - £100
Tremolo - £80
Ezekiel - £60
Ill ship worldwide, at cost. I can agree or estimate this up front.
Shipping to the US with a non tracked service for a pedal is about £12
MN3005 dirtbag. 330pF clock capacitor for about 800ms of delay (quiet, but evident, clock whine kicks in after about 500ms as you'd expect) - socketed so you can sub in 220/240pF instead.
Runs off 9v DC tip-ve, internally Road-Raged up to a stable 15v
Biased as per the docs sounding lovely and trim'd for "edge of runaway" feedback.
Labour of love and not looking to give it away.
Will entertain trades of a similar DIY calibre, or commercial.
Im in the UK...
---------------------------------------------------------------------------------
FOXX Tone Machine clone, Wolfshirt board.
1n34a's. Sounds soooo nasty. Bicolor LED, dual footswitchable modes
---------------------------------------------------------------------------------
Way Huge Aqua Puss mk1 clone, with MN3005 chip.
The holy grail in my opinion, and many others. I love this pedal. But I have 2. And the means to make 2 more, so....
old gutshot, has shielded ins and outs now...
---------------------------------------------------------------------------------
Tap Tempo Tremolo
Taylors Musicpcb.com project. Simply put the best trem out there, and lots of boutweeks are just using the exact same architecture as far as I can see.
---------------------------------------------------------------------------------
DAM Ezekiel-ish clone
4 mode overdrive distortion loosely based on the rat. I didnt use the same clipping diodes as the original for the Ge mode - I used 1n60p's IIRC... Graphics are peeling at the edges (decals) and can/will be redone in monochrome.
Open to offers and trades
Prices:
Memory Man - £160
Tone Machine - £45
Aqua Puss - £100
Tremolo - £80
Ezekiel - £60
Ill ship worldwide, at cost. I can agree or estimate this up front.
Shipping to the US with a non tracked service for a pedal is about £12
- LaceSensor
- Cap Cooler
Trem and seek sold.
- LaceSensor
- Cap Cooler
trem, zeke and aqua puss sold