Klon Centaur Klone PCB
- Groovenut
- Resistor Ronker
Hey all!
I have one of these left over from a series of three builds. The layout and pcb are verified. They are my own layout with the switch mounted resistors on the pcb. Fits nicely into a 1590B enclosure. The silkscreen is a little hard to read is some places so I will email a clear layout with it. You can tell by the purple soldermask that it is an OSH Park pcb, top notch.
$15 plus post
https://www.dropbox.com/s/zvtof7vvwcx5w ... M.jpg?dl=0
https://www.dropbox.com/s/5trgqgq7pks5u ... M.jpg?dl=0
I have one of these left over from a series of three builds. The layout and pcb are verified. They are my own layout with the switch mounted resistors on the pcb. Fits nicely into a 1590B enclosure. The silkscreen is a little hard to read is some places so I will email a clear layout with it. You can tell by the purple soldermask that it is an OSH Park pcb, top notch.
$15 plus post
https://www.dropbox.com/s/zvtof7vvwcx5w ... M.jpg?dl=0
https://www.dropbox.com/s/5trgqgq7pks5u ... M.jpg?dl=0
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 596 times
- Been thanked: 2061 times
do you have the OSH park listing name ?
be kind to all animals - especially human beings