Re: Frog Tube Preamp Inspired by Alembic F2b
Posted: 22 Dec 2018, 16:21
Hi Mark!
This thread has been dead for a while, so sorry for the necro. But I figured it is the right place to ask questions about this project. Suppose I want to build a headphone amp with this. I'm assuming the preamp won't be enough to drive the load. How would I go about designing an output-stage? Just something like a NE5532 buffer stage? For example like in this schematic http://lh4.ggpht.com/-J75-73v2hYo/Tl1PO ... 25255D.png in the lower right, from the volume pot onwards.
This thread has been dead for a while, so sorry for the necro. But I figured it is the right place to ask questions about this project. Suppose I want to build a headphone amp with this. I'm assuming the preamp won't be enough to drive the load. How would I go about designing an output-stage? Just something like a NE5532 buffer stage? For example like in this schematic http://lh4.ggpht.com/-J75-73v2hYo/Tl1PO ... 25255D.png in the lower right, from the volume pot onwards.
