Unfinished Dipthonizers (2)

Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.
Post Reply
User avatar
toneman
Resistor Ronker
Information
Posts: 343
Joined: 17 Jul 2007, 13:05
my favorite amplifier: anything that works
Completed builds: meatolation, wobolation, ringolation clones, PAiA synths/modulars, dipthonizer clone, MOTM modules, pedal mods and repairs
Location: sacatomatoes, Kali4neeaa
Has thanked: 183 times
Been thanked: 45 times

Post by toneman »

Hey stompbox fanz.

I have two unboxed, working, Dipthonizer projects for sale.
Actually, They WERE working, but have been in a storage bag for almost 2yrs. So....AS IS-AS IS-AS IS.

Goto the link at photobucket for 3 pictures of each project.
https://s1305.photobucket.com/user/tone ... t=3&page=1

The DIPTH-A project has the DIPTH pcb, a mixer pcb, and a preamp pcb, and external volume.

The DIPTH-B project has the DIPTH pcb, an uncompleted mixer, and a preamp pcb.

BOTH projects have a carefully matched sets of capacitors for the 4 frequency capacitors
in the filter units. 2 caps per filter. See the closeup photos. U can change the filter
frequencies by changing the jumpers. Normally, you would choose the same row, but you don't
have to. I've just not had any more time to devote to this project. I'm asking $60 each
including shipping inside the USA. The ONE chicken head knob is included.
I will include the schematics for the simple mixer and preamp.
Tone-to-the-Bone

User avatar
toneman
Resistor Ronker
Information
Posts: 343
Joined: 17 Jul 2007, 13:05
my favorite amplifier: anything that works
Completed builds: meatolation, wobolation, ringolation clones, PAiA synths/modulars, dipthonizer clone, MOTM modules, pedal mods and repairs
Location: sacatomatoes, Kali4neeaa
Has thanked: 183 times
Been thanked: 45 times

Post by toneman »

PRICE DROP NOTICE!!!

$50 each + shipping (USA)

All info from previous ad applies.

A note about the "mixer":
I broke out the outputs of each filter and ran them to the inputs of a simple mixer.
This way, U can hear EACH filter by turning the other down/off.
Really helps to hear what is going on with the sweeps!
Tone-to-the-Bone

Post Reply