chrome ferrule nut for neutrik NMJ6HCD2 (crybaby jack)

Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.
Post Reply
User avatar
slim_blues_boy
Breadboard Brother
Information
Posts: 103
Joined: 17 Feb 2009, 12:51

Post by slim_blues_boy »

anyone know where I can get replacement chrome ferrule for pcb mount jack in crybaby (neutrik NMJ6HCD2)?

small bear used to sell those, but out of stock at this moment.
tried to googled it looking for other source, but no luck so far.

Thanks
Attachments
picture borrowed from small bear for reference
picture borrowed from small bear for reference
Dscn0084__60923.jpg (6.52 KiB) Viewed 874 times

User avatar
Ice-9
Degoop Doctor
Information
Posts: 1094
Joined: 31 Mar 2009, 15:29
my favorite amplifier: Marshall
Completed builds: Far to many to afford the enclosures for them all. :)
Has thanked: 134 times
Been thanked: 359 times
Contact:

Post by Ice-9 »

Mouser stock them, although the link is for UK Mouser are a USA company. check the usa site

http://www.mouser.co.uk/ProductDetail/N ... JbQA%3D%3D
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?

User avatar
slim_blues_boy
Breadboard Brother
Information
Posts: 103
Joined: 17 Feb 2009, 12:51

Post by slim_blues_boy »

Ice-9 wrote:Mouser stock them, although the link is for UK Mouser are a USA company. check the usa site

http://www.mouser.co.uk/ProductDetail/N ... JbQA%3D%3D
thanks for the info. but I'm looking for the ferrule only, not the jack.
I got few crybaby pcb but missing the chrome ferrule.

User avatar
Ice-9
Degoop Doctor
Information
Posts: 1094
Joined: 31 Mar 2009, 15:29
my favorite amplifier: Marshall
Completed builds: Far to many to afford the enclosures for them all. :)
Has thanked: 134 times
Been thanked: 359 times
Contact:

Post by Ice-9 »

slim_blues_boy wrote:
Ice-9 wrote:Mouser stock them, although the link is for UK Mouser are a USA company. check the usa site

http://www.mouser.co.uk/ProductDetail/N ... JbQA%3D%3D
thanks for the info. but I'm looking for the ferrule only, not the jack.
I got few crybaby pcb but missing the chrome ferrule.
Yeah I realized that but in all honesty you may find it hard to get them separate or any cheaper than the complete jack socket with the ferrue. Just use the ferrule. :secret:
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?

Post Reply