Looking For This Boss DC Jack
Information
- Posts: 2
- Joined: 03 Feb 2016, 20:09
Hello everyone,
Long time lurker, first time poster!
It seems this time that searching here or on the Net doesn't yield results.
I lent my Boss OD-3 to a friend, only to get it back with a broken DC jack!
Thing is, this one seems to have a unusual barrel jack connector. It has 5 solder terminals with what looks like two different (+) contacts going to different parts of the pcb.
Does anyone know where I could order a replacement? I couldn't find it anywhere. Maybe I don't know where to look!
Here's pictures of hot the solder tabs are laid out on the circuit board:
Sorry, I wish I could show you the actual part, but what was remaining just self-destruct when removing it from the board...
Thanks in advance!
Long time lurker, first time poster!
It seems this time that searching here or on the Net doesn't yield results.
I lent my Boss OD-3 to a friend, only to get it back with a broken DC jack!
Thing is, this one seems to have a unusual barrel jack connector. It has 5 solder terminals with what looks like two different (+) contacts going to different parts of the pcb.
Does anyone know where I could order a replacement? I couldn't find it anywhere. Maybe I don't know where to look!
Here's pictures of hot the solder tabs are laid out on the circuit board:
Sorry, I wish I could show you the actual part, but what was remaining just self-destruct when removing it from the board...
Thanks in advance!
- Rocket Roll
- Solder Soldier
Information
Information
- Posts: 2
- Joined: 03 Feb 2016, 20:09
Yes, that's pretty much it, thanks.
Anybody ever seen this part for sale somewhere?
Anybody ever seen this part for sale somewhere?
- Intripped
- Cap Cooler
https://www.boss.info/us/support/
Probably the best option is to ask boss directly, there's a section for parts ordering as well.
Found this also, but I'm not sure if it's the same exact part:
http://www.fullcompass.com/prod/210114-Boss-13449717
Probably the best option is to ask boss directly, there's a section for parts ordering as well.
Found this also, but I'm not sure if it's the same exact part:
http://www.fullcompass.com/prod/210114-Boss-13449717
- Ice-9
- Degoop Doctor
Information
If you can't get the exact replacement part then you could always draw out the circuit around the psu section and figure out what is being switched and connected then convert it to a move available psu connecter type.
The connector Intripped linked looks good though.
The connector Intripped linked looks good though.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !
No silicon heaven ? preposterous ! Where would all the calculators go ?
No silicon heaven ? preposterous ! Where would all the calculators go ?