Looking For This Boss DC Jack

Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.
Post Reply
User avatar
eric_telemaque
Information
Posts: 2
Joined: 03 Feb 2016, 20:09

Post by eric_telemaque »

Hello everyone,

Long time lurker, first time poster!
It seems this time that searching here or on the Net doesn't yield results.

I lent my Boss OD-3 to a friend, only to get it back with a broken DC jack!
Thing is, this one seems to have a unusual barrel jack connector. It has 5 solder terminals with what looks like two different (+) contacts going to different parts of the pcb.
Does anyone know where I could order a replacement? I couldn't find it anywhere. Maybe I don't know where to look!

Here's pictures of hot the solder tabs are laid out on the circuit board:

Image
Image

Sorry, I wish I could show you the actual part, but what was remaining just self-destruct when removing it from the board...
Thanks in advance!

User avatar
Rocket Roll
Solder Soldier
Information
Posts: 249
Joined: 27 Mar 2008, 08:25
Location: Belgrade
Has thanked: 19 times
Been thanked: 44 times
Contact:

Post by Rocket Roll »

100_5704.jpg
100_5704.jpg (28.84 KiB) Viewed 1268 times
100_5702.jpg
100_5702.jpg (28.93 KiB) Viewed 1268 times

User avatar
eric_telemaque
Information
Posts: 2
Joined: 03 Feb 2016, 20:09

Post by eric_telemaque »

Yes, that's pretty much it, thanks.
Anybody ever seen this part for sale somewhere?

User avatar
Intripped
Cap Cooler
Information
Posts: 670
Joined: 25 Aug 2009, 01:03
Location: Italy
Has thanked: 989 times
Been thanked: 305 times

Post by Intripped »

https://www.boss.info/us/support/

Probably the best option is to ask boss directly, there's a section for parts ordering as well.

Found this also, but I'm not sure if it's the same exact part:

http://www.fullcompass.com/prod/210114-Boss-13449717

User avatar
Ice-9
Degoop Doctor
Information
Posts: 1094
Joined: 31 Mar 2009, 15:29
my favorite amplifier: Marshall
Completed builds: Far to many to afford the enclosures for them all. :)
Has thanked: 134 times
Been thanked: 359 times
Contact:

Post by Ice-9 »

If you can't get the exact replacement part then you could always draw out the circuit around the psu section and figure out what is being switched and connected then convert it to a move available psu connecter type.

The connector Intripped linked looks good though.
It's fairly straight forward, if you want to start it , press start. You can work out the rest of the controls for yourself !

No silicon heaven ? preposterous ! Where would all the calculators go ?

Post Reply