1:1 transformer (for audio isolation)

Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.
User avatar
robinbowes
Breadboard Brother
Information
Posts: 146
Joined: 06 Jan 2011, 14:07
Location: York, UK
Has thanked: 17 times
Been thanked: 6 times

Post by robinbowes »

mauman wrote:I've successfully used the Xicon 42TM018-RC transformer, which is 1:1 with 10k impedance on both sides. Data sheet: http://www.mouser.com/ds/2/449/XC-600134-1212477.pdf I got mine for less than 4 bucks each at Mouser. The data sheet says the 3dB frequency response is 300Hz to 3.4kHz, but don't be afraid of that - after adding enough gain to bring it back it unity, my application measured quite flat to 10kHz. I got the idea from this circuit: http://www.geofex.com/FX_images/TransformerSplitter.pdf , you could adapt it from a splitter to a single in/out for isolation. Regards, Mike
Thanks for the suggestion

I think I actually have an ABY box that uses those ( https://buildyourownclone.com/collectio ... mpselector )

R.

Post Reply