I got a 12 lb box of components today

nbabmf · Post by **nbabmf** » 16 Nov 2007, 05:58

I'm going to start sorting through it and cataloging it now.

nbabmf · Post by **nbabmf** » 16 Nov 2007, 07:24

Almost everything was in a bag with a part number but I have no idea what company these part numbers are from, so I had to use my DMM to measure the resistors and I read the values off the capacitors. Well, here's what I got...

Resistors (1000 each):
3.7
10
27
33
4.7
220
1.2k
1.5k
2.4k
2.7k
3k
4.7k
5.6k
10k
12k
30k
430k
1M

Capacitors (anywhere from 10-100 each):
4.7uF 35v electrolytic
220uF 25v electrolytic
1000uF 50v electrolytic
4700uF 50v electrolytic (3 inches long by 1 inch around, whoa!)

Diodes (about 100 each):
1N5401
1N5258
1N5243
T4148

I also got a shitload of tiny yellow/orange/light brown pieces which I've never seen before. They were so tiny, the print on them was next to impossible for me to read without a magnifying glass. Any idea what they are? Here is what I could read off them:

JCK 750
MKD 840 RSE or ASE 104
MD5 932 5E 104
R2R 270

I could be wrong about the letters, but I'm pretty sure of the numbers.

Conguito · Post by **Conguito** » 16 Nov 2007, 12:29

nbabmf wrote: JCK 750
MKD 840 RSE or ASE 104
MD5 932 5E 104
R2R 270

I could be wrong about the letters, but I'm pretty sure of the numbers.

I think that all can be film or ceramic caps, I'm not sure about the first thing, but the rest of them are sure film or ceramic caps.
104 = 100nF
270 = 27pF or 270pF it depends of the company who made the caps.
Salu2.

nbabmf · Post by **nbabmf** » 16 Nov 2007, 21:17

Yeah, I did a little research and found that they're itty bitty caps. I'll probably just buy/trade for some larger ones (using my giant cache of resistors as fodder). These probably aren't rated for very much voltage.