Sekova - Fuzz ( FA-II , Apollo , Crestwood ) [schematic]
I'm guessing the big one labeled 224m50 is 224nf 50v, so i should look for .22uf. open to suggestions as to what type. and if anyone has a guess on the other two. i've done recapping before but never on a guitar pedal.
according to the diagram posted above, the little green fuzzy one would be C10, so 0.001uF - sound right? film, ceramic?
according to the diagram posted above, the little green fuzzy one would be C10, so 0.001uF - sound right? film, ceramic?
- grizzlytone
- Breadboard Brother
224 = 220000pF = 220nF = 0.22uFdukeofearl wrote:I'm guessing the big one labeled 224m50 is 224nf 50v, so i should look for .22uf. open to suggestions as to what type. and if anyone has a guess on the other two. i've done recapping before but never on a guitar pedal.
according to the diagram posted above, the little green fuzzy one would be C10, so 0.001uF - sound right? film, ceramic?
thanks, i'll replace that one and see if it works. maybe the fuzzy ones are ok?
well i replaced that one cap and it's still not working. any other ideas?
- george giblet
- Resistor Ronker
DC voltages would be good.well i replaced that one cap and it's still not working. any other ideas?
It's possible the electros are stuff.
Are the leads on that smaller green-cap OK ?