Ibanez - FP-777 Flying Pan
- agoldoor
- Breadboard Brother
Hey, yo, sinnerooskie!
BYOC just released a Flying Pann kit that I am pretty sure is based on the original. I don't know if there's much you can derive from the following, but this is a link to the kit instructions:
http://buildyourownclone.com/soaringski ... ctions.pdf
Has a couple clear shots of the traces and all the component values... so that's something, I guess, heh.
BYOC just released a Flying Pann kit that I am pretty sure is based on the original. I don't know if there's much you can derive from the following, but this is a link to the kit instructions:
http://buildyourownclone.com/soaringski ... ctions.pdf
Has a couple clear shots of the traces and all the component values... so that's something, I guess, heh.
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Yeah, I have it already, but I'm more after the vintage board shots, I'm going to do the repro layout
- Professor SourTone
- Solder Soldier
Unfortunately the cap on the trace side is very fixed and I'm unwilling to disturb it...
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Sir? You're uber awesome!!!
- Dirk_Hendrik
- Old Solderhand
Information
sinner wrote:Sir? You're uber awesome!!!
Let me second that !!
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
What's the PCB dimension if I may ask?
Also, could you do another PCB shot? More "stright" and "in the face"
Also, could you do another PCB shot? More "stright" and "in the face"
- Dirk_Hendrik
- Old Solderhand
Information
- Dirk_Hendrik
- Old Solderhand
Information
sinner wrote:What's the PCB dimension if I may ask?
Also, could you do another PCB shot? More "stright" and "in the face"
You don't like the use of too much perspective correction either I presume
- borislavgajic
- Opamp Operator
Information
- Posts: 1542
- Joined: 27 Feb 2008, 14:23
- Completed builds: ...script phase90,ETI phaser,Ross phaser,mutronC200,vox wah,WH10,FW-3,mutronIII,DrQuack,Penfoldautowah,Tubezipper,
Dipthonizer,seekwah,Talkingpedal,morleywha
...soulpreacher,dynacomp,compulator
...buzzaround,fuzzfactory,screwdriver,sho,superdouper,St-9,RogerMayer octavia,Tychobrahe octavia,paralelluniverse,string damper,slowgear
...CE-2,ibanez fL301,EH theCloneTheory
EHX bassmicrosynth,EHX EnglishMuffin,Tube Phaser,springtubereverb ,greyDOD,FulldriveII mosfet,OCD,VOX repeat percussion,RingStinger,Meatball,12stage phaser.... - Location: Sombor , Serbia
- Has thanked: 131 times
- Been thanked: 277 times
this is vintage enough for me
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Naaah, it's for professional circuit developersDirk_Hendrik wrote:sinner wrote:What's the PCB dimension if I may ask?
Also, could you do another PCB shot? More "stright" and "in the face"
You don't like the use of too much perspective correction either I presume
- Dirk_Hendrik
- Old Solderhand
Information
And why is that bias provided with a trimmer?
- Güero 2.0
- Breadboard Brother
You are a respected member of this forum and also the DIY world.
For this reason, respect should be mutual, I guess.
Please, don't play the stupid.
You know what I mean, when I kindly asked for trimpots adjustments.
If our colleague can read these adjustments would be fine.
For this reason, respect should be mutual, I guess.
Please, don't play the stupid.
You know what I mean, when I kindly asked for trimpots adjustments.
If our colleague can read these adjustments would be fine.
"Come squeeze and suck the day.Come Carpe Diem baby!"
- Bernardduur
- Transistor Tuner
I also added the resdef; got one nice old one in a trade. Sounds absolutely wonderfull!
The switch is different to what was on the factory schematic. It is a 6P5T switch that has 3 pre arranged settings; the 2 in between settings are used to gound both outputs so you don't hear the switch clicking.
'No more....... loud music.......'
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
Follow my love for pedals and amps on https://bernardduur.blogspot.com and https://www.instagram.com/bernardduur1
- armdnrdy1
- Breadboard Brother
Thanks for that Bernardduur!
I recently checked the factory schematic against available board shots.
Are you sure that the (red-trace side) 470K between C27 & R21 goes to Vref2?
I see the Vref2 trace running under the 470K, and the 470K connected to the ground side of uninstalled R20.
Also…good catch on the switch!
Couldn’t the same thing be achieved using a 4 pole, 3 position rotary switch and installing a 1M resistor to ground on each output?
I recently checked the factory schematic against available board shots.
Are you sure that the (red-trace side) 470K between C27 & R21 goes to Vref2?
I see the Vref2 trace running under the 470K, and the 470K connected to the ground side of uninstalled R20.
Also…good catch on the switch!
Couldn’t the same thing be achieved using a 4 pole, 3 position rotary switch and installing a 1M resistor to ground on each output?