Ludwig Phase II vero.

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...
Post Reply
User avatar
digi2t
Degoop Doctor
Information
Posts: 284
Joined: 09 Feb 2011, 15:10
Has thanked: 54 times
Been thanked: 385 times

Post by digi2t »

I said i would do it, so here it is;

Image

Image

Image


Unverified until built, but matches the verified schematic from R.G. Keen's build document. Should work fine. Use the GEOFEX build document for all the off board wiring, and for the switches, pots, and whatever else that isn't on the vero BOM.

NOTE: I used two 100uF caps in the power section, instead of four 47uF caps as required in the build doc. Use whatever suits you, spacewise. I'm also using 1 watt resistors for the LED's, instead of all those 1/4 watters in the build doc.

Everything here is also available here; http://www.aronnelson.com/gallery/main. ... +Phase+II/.

That's it... I'm stickin' a fork in this sucker. :cheers
No matter how many times I cut it, it`s STILL too short!

https://www.deadendfx.com/

User avatar
kaycee
Solder Soldier
Information
Posts: 158
Joined: 16 Mar 2008, 18:04
Has thanked: 27 times
Been thanked: 9 times

Post by kaycee »

The sooner they lock you up and throw away the key, the better, you lunatic :wink:

I'm not even thinking about starting this till I get the Project V going.

User avatar
digi2t
Degoop Doctor
Information
Posts: 284
Joined: 09 Feb 2011, 15:10
Has thanked: 54 times
Been thanked: 385 times

Post by digi2t »

kaycee wrote:The sooner they lock you up and throw away the key, the better, you lunatic :wink: .
Yeah, but they'll have to pry the DIYLC out of my cold, stiff, dead hand.
No matter how many times I cut it, it`s STILL too short!

https://www.deadendfx.com/

User avatar
hozy31
Information
Posts: 17
Joined: 04 Feb 2015, 10:02
Has thanked: 7 times
Been thanked: 9 times

Post by hozy31 »

Has anyone had a go at making this thing yet as I am slowly aquiring the parts? Fascinated by this one!

User avatar
digi2t
Degoop Doctor
Information
Posts: 284
Joined: 09 Feb 2011, 15:10
Has thanked: 54 times
Been thanked: 385 times

Post by digi2t »

hozy31 wrote:Has anyone had a go at making this thing yet as I am slowly aquiring the parts? Fascinated by this one!
Not to my knowledge.
No matter how many times I cut it, it`s STILL too short!

https://www.deadendfx.com/

User avatar
pinkjimiphoton
Transistor Tuner
Information
Posts: 1242
Joined: 12 Sep 2010, 19:03
my favorite amplifier: my own, a redesigned princeton
Completed builds: so fucking many goddamn pedals it would make your ass hurt just looking at 'em all!!!!!
there's videos that totally suck of about 90 of 'em here:
http://youtube.com/666pinkster
gimme a like: http://facebook.com/pinkjimiphotonrocks
Location: new world order land (formerly la-la land)
Has thanked: 358 times
Been thanked: 479 times
Contact:

Post by pinkjimiphoton »

damn,
it's gonna take a big enclosure!!!
i have one dino built for me, cuz he is my brother and an awesome human being..
but i may take a crack at this one of these days for shits n giggles.
it would be a blast to try and pull it off!! ;)
"When the power of love overcomes the love of power the world will know peace."
Slava Ukraini!

User avatar
PMowdes
Information
Posts: 30
Joined: 25 Feb 2016, 12:44
Has thanked: 7 times
Been thanked: 6 times

Post by PMowdes »

hozy31 wrote:Has anyone had a go at making this thing yet as I am slowly aquiring the parts? Fascinated by this one!
Hozy, we need to petition Jimi, Dino and Mr Keen to kindly agree to doing another run of PCB's. :wink:

User avatar
hozy31
Information
Posts: 17
Joined: 04 Feb 2015, 10:02
Has thanked: 7 times
Been thanked: 9 times

Post by hozy31 »

Phil, i did build this on vero and never managed to get it going and have left it for about a year and half. Stills sits in front of me everyday like its teasing me.I know i have wiring issues with the switches but the schematic blows my brain every time i look at it :shock: Not to say i've given up on it, its now a case of audio probing and i'm just not looking forward to doing it :roll: If anyone could figure out the wiring to all the switches this would certainly help my debugging before audio probing?

User avatar
hozy31
Information
Posts: 17
Joined: 04 Feb 2015, 10:02
Has thanked: 7 times
Been thanked: 9 times

Post by hozy31 »

Sorry, should have added if another PCB run was on the cards i would still take one :D .

User avatar
hozy31
Information
Posts: 17
Joined: 04 Feb 2015, 10:02
Has thanked: 7 times
Been thanked: 9 times

Post by hozy31 »

Also, i did open a thread at GuitarFX layouts where i updated the vero so i cold visualise it better and tried to add the switching arrangements but i failed :oops: . Just search for the beast in the forum.

Post Reply