EH - Soulpreacher  [schematic]

Discussion regarding early stompbox technology: 1960-1975 Please keep discussion focused and contribute what info you have...

Re: EH - Soulpreacher

Postby phibes » 05 Jan 2012, 06:15

Bernardduur posted a schematic of the OTA SP in question above. Isn't the Low Frequency Compressor the same as the Black Finger?
GuitarlCarl - "TGP = The Gear Polishers"

Image Ken
User avatar
phibes
Transistor Tuner
 
Posts: 1105
Joined: 10 Dec 2008, 02:17
Location: United States
Has thanked: 84 times
Have thanks: 183 times

Re: EH - Soulpreacher

Postby pedalgrinder » 05 Jan 2012, 06:56

The low frequency compressor uses and 10k resistor and and a 1uf cap to ground as a low pass filter there was two versions of it one was an ota the other which i like better used a transistor for attenuation. The blackfinger only came out in a out please correct me if iam wrong. as far as i understand and doesn't employ a low pass filter as the output of the ota heads straight in to the tone control. Hope that helps anyways.
What's the best thing about fat chicks and scooters? There both fun to ride around until your mates find out!
User avatar
pedalgrinder
Cap Cooler
 
Posts: 552
Joined: 29 Aug 2011, 07:05
Location: South Australia Adelaide
Has thanked: 201 times
Have thanks: 150 times

Re: EHX - Soul Preacher (Compressor)

Postby R O Tiree » 01 Oct 2012, 18:45

trad3mark wrote:Hey all,

Searched for this, but there doesn't seem to be a thread. Apologies if there is!! Just wondering if anyone has one of these or has built one? I'm looking at building a compressor with the parts that i have and this one seems mighty nice. The schematic is all over the web, and there's two drawings of it:

Drawing 1:
http://www.montagar.com/~patj/soulprch.gif

Drawing 2:
http://www.schematics.ca/modules/PDdownloads/singlefile.php?cid=67&lid=473


It seems that Drawing 2 at schematics.ca has been removed. Has anyone got a copy handy, perchance?

Thanks
R O Tiree
 
Posts: 1
Joined: 01 Oct 2012, 18:26
Has thanked: 0 time
Have thanks: 0 time

Re: EH - Soulpreacher

Postby DrNomis » 17 Oct 2012, 18:12

I've actually built a Soul Preacher compressor using schematics I found on the internet, one thing I did notice is that although my build worked well when first built, it had a couple of issues, firstly the sensitivity would slowly reduce till I couldn't tell whether it was doing any compressing, secondly the circuit had a nasty habit of suddenly saturating with gain and distorting, I also found that my build was very picky with the type of FET used, some FETs worked reasonably well while others didn't.... :thumbsup

All in all, I think that the Soul Preacher is a bit of a finicky circuit to build and get going right..... :thumbsup
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
User avatar
DrNomis
Old Solderhand
 
Posts: 6864
Joined: 16 Jul 2009, 05:56
Location: Darwin,Northern Territory Australia
Has thanked: 123 times
Have thanks: 384 times

Re: EH - Soulpreacher

Postby mrelwood » 28 Oct 2012, 21:16

The schematics in this thread seemed to be all for the bigger Soul Preacher Vintage. I bought the Soul Preacher Nano (SMC board), and I would really love to get to see the schematic. Any hints?

The Nano is actually very good on the bass. There is a trimmer inside that can be adjusted to ease on the squish somewhat, and it made the pedal from overboard to very usable. Had my first gig with it last night. It's a keeper.

One peculiar issue is that if I power it from a splitter cable, whenever I connect the same power to another pedal that connects the power minus to signal ground, the signal output of the Soul Preacher Nano increases significantly. I think the compressor also squishes more that way. What I did as a quick fix was to connect the power minus connector to ground internally, and adjust the trimmer again.

If the schematic would allow, I would like to try a pot for the attack settings, and increase the range to even longer attack. I only use the long setting.
mrelwood
 
Posts: 25
Joined: 27 Mar 2009, 17:16
Has thanked: 0 time
Have thanks: 0 time

Re: EH - Soulpreacher

Postby Sendy CZ » 02 Dec 2017, 21:55

Pleas have anybody Soul Preacher with LM3080 - "PC4501" PCB?

I have one SP to repair, unfortunately somebody has exchanged some parts and some parts are missing.
Sendy CZ
 
Posts: 1
Joined: 08 Dec 2013, 03:22
Has thanked: 0 time
Have thanks: 0 time

Previous

Return to Vintage Stompbox Corner ( ... - 1975)

Who is online

Users browsing this forum: EmmG, FiveseveN, Google [Bot], Scruffie and 5 guests