Freedman Brown Eye

Tube or solid-state, this section goes to eleven!

Freedman Brown Eye

Postby aa.electronics » 08 Jul 2017, 02:45

Guys, if someone is interested, I have manufactured some boards that can be used for personal replicas of the Brown Eye 100W models (BE, JJ, SS, Buttslax, PhilX) but also Marshall 100W models (2204, Superlead). The board is inspired by the actual one used for the 100W models with some added improvements.
These are the specs:

- 2 oz/ft copper, 2 layers
- 3 mm thickness
- black board, white silkscreen
- IPC-A-600G class II quality
- Dimensions are 558 x 74 mm
- bigger traces wrt to the original in order to get close to 20 AWG corresponding cross sectional area
- component holes that fit turrets, so that it's possible to use a PCB-turret board hybrid style
- two big ground pads on top and bottom layers like in the Friedman board
- additional grounds and 12V connection points

Shoot me a pm if you're interested

DISCLAIMER: THIS IS NOT A CARBON COPY OF THE ORIGINAL BOARD. I DID NOT MANUFACTURE THE ORIGINAL AND I AM NOT TRYING TO CONFUSE THE CONSUMER OR COMPETE WITH ITS BUSINESS. NO LOGO OR TRADEMARK ARE BEING USED ON THE BOARD.
ALL PRODUCT AND COMPANY NAMES ARE TRADEMARKS™ AND/OR REGISTERED® TRADEMARKS OF THEIR RESPECTIVE HOLDERS. THE MENTION OF THEM IN THIS POST IS FOR REFERENCE ONLY, AND IT DOES NOT IMPLY ANY AFFILIATION WITH/OR ENDORSEMENT BY THEM.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
aa.electronics
 
Posts: 6
Joined: 07 May 2017, 13:59
Has thanked: 0 time
Have thanks: 1 time

Return to Amplifiers

Who is online

Users browsing this forum: No registered users and 8 guests