Transformer specification (AX84 project)

Tube or solid-state, this section goes to eleven!
Post Reply
User avatar
Lukaamp
Information
Posts: 6
Joined: 06 Apr 2016, 13:04
Has thanked: 2 times
Been thanked: 1 time

Post by Lukaamp »

Hi, can someone make specification of an transformer similar to Hammond 369EX.
http://www.hammondmfg.com/pdf/EDB369EX.pdf.

Here it is my requirements:

1. Surface of laminate E-I core is 7,5 cm2 (2,5 cm x 3 cm)
2. Power 45 AV
3. Up - 230V / 50 Hz
4. Us1 - 360 CT @ 0,2 mA
5. Us2 - 6,3 CT @ 3 A

Information that I need is:

1. Nx - number of windings per 1V
2 Np - Number of Primary windings
3. Ns1 - Secondary 1
4. Ns2 - Secondary 2
5. Dp - Wire diameter of primary (AWG)
6. Ds1 - Wire diameter of secondary 1 (AWG)
7. Ds1 - Wire diameter of secondary 2 (AWG)

Thx...

User avatar
Zozobra
Information
Posts: 5
Joined: 11 Oct 2011, 00:40
Has thanked: 1 time

Post by Zozobra »

If you're looking to get a power transformer made then it might be worth looking to see if you have any local shops who can wind a toroidal transformer for you. I'm in the UK and I've used toroidy.pl for one off customs PT's in the past as they're very reasonably priced and the shipping isn't terrible.

Post Reply