Komet amps

Tube or solid-state, this section goes to eleven!

Re: Komet amps

Postby noelgrassy » 22 May 2008, 15:38

Bajaman, Those pics are of the original amp. Mine is still in the preliminary stages of chassis hole punching & board fabbing. I'm doing everything humanly possible not to stray from the original in order to have a reasonably accurate benchmark.

Little niggles like the actual length of the stainless steel standoffs had to be guessed at using dimensions of the 80uf Mallory caps under the power supply board.I'm going on the premiss that the filament leads are pushed to the back of the amp and flat like a Marshall would have them. (I'm mean I don't see them anywhere...) Layout dimensions for the components were given to me by one of the fine folks at Ampgarage.
When the brain is done I have to fab the cabinet. I'm trying to picture how I'll cut the kerfs/mortises in the mitered joints that eventually recieve typical small gold piping after the Tolex is applied. Possibly a jig for the table saw can be devised that allows one to rotate the cab nimbley over the saw blade.
Yeah, yikes.
A finger tally before & after is on my must do list.
Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed. US Copyright Office
User avatar
noelgrassy
Resistor Ronker
 
Posts: 388
Joined: 28 Nov 2007, 03:43
Location: Vacuum Tube Valley, Cali
Has thanked: 11 times
Have thanks: 3 times

Re: Komet amps

Postby roseblood11 » 26 Jun 2017, 21:25

Most links are dead. Can anybody upload the schematics and layouts as attachements, please?
roseblood11
Opamp Operator
 
Posts: 1683
Joined: 23 Aug 2008, 15:21
Has thanked: 312 times
Have thanks: 298 times

Re: Komet amps

Postby marshmellow » 27 Jun 2017, 12:41

I drew the schematic based on the layout. For more info go to ampgarage.com, there is everything Trainwreck related.
You do not have the required permissions to view the files attached to this post.

For this message the author marshmellow has received thanks: 2
floris (27 Jun 2017, 13:38), roseblood11 (30 Jun 2017, 19:58)
marshmellow
Resistor Ronker
 
Posts: 394
Joined: 16 Aug 2007, 08:31
Location: Germany
Has thanked: 11 times
Have thanks: 87 times

Previous

Return to Amplifiers

Who is online

Users browsing this forum: Alexa [Bot] and 3 guests