Komet amps
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 595 times
- Been thanked: 2056 times
Sorry - I do not have any further information
The pdf layout is excellent though - it should be a nice sounding amplifier - use good transformers and filter choke - you cannot go wrong
bajaman
The pdf layout is excellent though - it should be a nice sounding amplifier - use good transformers and filter choke - you cannot go wrong
bajaman
- call1800ksmyazz
- Breadboard Brother
I began drawing up a schematic for the preamp based on that layout.
https://i14.photobucket.com/albums/a303 ... Preamp.jpg
Kerry
https://i14.photobucket.com/albums/a303 ... Preamp.jpg
Kerry
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 595 times
- Been thanked: 2056 times
Looks good Kerry - please don't stopI began drawing up a schematic for the preamp based on that layout.
bajaman
- call1800ksmyazz
- Breadboard Brother
Thanks! Glad I could contribute something. After that preamp is the power supply and power tubes which started jumbling in my brain at 11:30pm when I was tracing the layout. I had to stop before I went crazy haha.
I will attempt the rest when I get a chance, it starts getting very hard to follow though, but I can try it.
I will attempt the rest when I get a chance, it starts getting very hard to follow though, but I can try it.
- marshmellow
- Cap Cooler
Could someone please upload the layout of the Komet again? The download link has expired.
http://download.yousendit.com/EBF2FD2C0FAD3A10marshmellow wrote:Could someone please upload the layout of the Komet again? The download link has expired.
- marshmellow
- Cap Cooler
Thaaanks!
- invalidcd
- Breadboard Brother
Information
Is at all possible to repost that link ... pretty please
For building that kind of stuff I strongly recommend signing up to ampgarage.com and getting in friendly contact with allynmey! He can get you nearly all you want.
The guys at ampgarage.com are very friendly and helpful. Several there have built Komet clones....
Greetings,
Timo
The guys at ampgarage.com are very friendly and helpful. Several there have built Komet clones....
Greetings,
Timo
- KHELSTROM
- Solder Soldier
Look under "post 70's amps" all the way on the left directly above Laney. Its only the preamp tho. http://www.schematicheaven.com/post70s.htmfloris wrote:I can not find the schematic at Schematic Heaven. Are you sure its there?
- marshmellow
- Cap Cooler
The PDF has two pages .KHELSTROM wrote:....Its only the preamp tho....
- noelgrassy
- Resistor Ronker
Information
- Posts: 388
- Joined: 28 Nov 2007, 02:43
- my favorite amplifier: MOTS Magnatone & Trainwreck
- Completed builds: Tonebender Mk II w/ 3 OC75's, Burns BuzzAround w/NKT 275,Rangemaster w/ OC44, Fuzz Face w/ SKS363's, CJOD, Harmonic Percolator w/2N404A & 2N3635(vintage correct box,sliding pots, 1%glass resistors),Stack-O-Dimes & Whipple Wahs,
- Location: Vacuum Tube Valley, Cali
- Has thanked: 11 times
- Been thanked: 3 times
I'm building this right now with Heyboer iron & a welded, 1/8" Aluminum chassis.
The sockets alone were almost $60 USD. The Clarostat RV4 pots I don't already own will be another $60 almost.
My Greenlee punches are whimpering as they strain to cleanly make all my divots.
Many of these Komet 60 components were discontinued the year the Komets were released. Luckily I had the old ceramic glazed Ohmite screen resistors and Mallory 8uf @250VDC bias caps. I'm lacking one solitary 330K 1 watt carbon film resistor & no one seems to have any in stock.
I just hope it doesn't mimic my Express amp in too many areas or it'll be a real bitch to chose the one I keep.
This puppy will be bulletproof and gorgeous to behold on the inside when I'm all done.
I had the faceplates made to look exactly like the Komet's except for their company logo of course.
The sockets alone were almost $60 USD. The Clarostat RV4 pots I don't already own will be another $60 almost.
My Greenlee punches are whimpering as they strain to cleanly make all my divots.
Many of these Komet 60 components were discontinued the year the Komets were released. Luckily I had the old ceramic glazed Ohmite screen resistors and Mallory 8uf @250VDC bias caps. I'm lacking one solitary 330K 1 watt carbon film resistor & no one seems to have any in stock.
I just hope it doesn't mimic my Express amp in too many areas or it'll be a real bitch to chose the one I keep.
This puppy will be bulletproof and gorgeous to behold on the inside when I'm all done.
I had the faceplates made to look exactly like the Komet's except for their company logo of course.
Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed. US Copyright Office
- noelgrassy
- Resistor Ronker
Information
- Posts: 388
- Joined: 28 Nov 2007, 02:43
- my favorite amplifier: MOTS Magnatone & Trainwreck
- Completed builds: Tonebender Mk II w/ 3 OC75's, Burns BuzzAround w/NKT 275,Rangemaster w/ OC44, Fuzz Face w/ SKS363's, CJOD, Harmonic Percolator w/2N404A & 2N3635(vintage correct box,sliding pots, 1%glass resistors),Stack-O-Dimes & Whipple Wahs,
- Location: Vacuum Tube Valley, Cali
- Has thanked: 11 times
- Been thanked: 3 times
I'll send you the schematic or the missing details if you PM me your needs. Provided you continue passing it to whomever requests it. I'm too busy to hold the gift bearing pose.
I hope that's not too snotty for some.
Others will nod in agreement I trust.
justataste-----
continue rocking
I hope that's not too snotty for some.
Others will nod in agreement I trust.
justataste-----
continue rocking
Copyright does not protect facts, ideas, systems, or methods of operation, although it may protect the way these things are expressed. US Copyright Office
- bajaman
- Old Solderhand
Information
- Posts: 4549
- Joined: 26 Jun 2007, 21:18
- Location: New Brighton, Christchurch, NZ
- Has thanked: 595 times
- Been thanked: 2056 times
Looks nice Noel
bajaman
bajaman
be kind to all animals - especially human beings