Trace Elliot GP7SM130

Tube or solid-state, this section goes to eleven!
User avatar
himister
Resistor Ronker
Information
Posts: 425
Joined: 07 May 2009, 00:48
Has thanked: 21 times
Been thanked: 30 times

Post by himister »

Great! Big thanks from me too Fred. :thumbsup

I must say, thanks to this thread I made last year, I had some number of request for schematics I've downloaded from britishaudioservice some time ago. From time to time some people ask me to send them schematics for specific TE models.
What I'd like to do is to share those schematics on some permanent link other then temp rapidshare or something like that.
If anyone has a good proposal where to upload those, please post here, not that I'm lazy to send them personally but to be available to all who find them here on the list posted above. So any suggestions would be very welcome.
Cheers to all. :wink:

User avatar
mozwell
Breadboard Brother
Information
Posts: 112
Joined: 11 Mar 2009, 23:01
my favorite amplifier: home made SVT2
Completed builds: baja tube driver, several TS variants, Sansamp GT2, Ross Comp
Location: Melbourne, Australia
Has thanked: 22 times
Been thanked: 68 times

Post by mozwell »

Some trace Elliot service manuals here
http://fileshare.eshop.bg/equipment_mfg ... iot_5.html

User avatar
bluesman
Information
Posts: 12
Joined: 08 May 2008, 15:36

Post by bluesman »

Hey! thanks a lot! I've got one of these but I have to repair it. It was repaired before, and some dumbass replace the 470 ohms bias trimpot for a jumper, and I never knew it's value until yesterday! Thanks!

User avatar
clintrubber
Breadboard Brother
Information
Posts: 99
Joined: 08 Oct 2008, 19:21
Location: The Netherlands
Has thanked: 16 times
Been thanked: 5 times
Contact:

Post by clintrubber »

Thanks all for the info here, great thread!

I'm looking for the schematic of the

GP12 5 way Footswitch

(or the related model:
ST-5Way-FS Speed Twin Foot Controller, which seems to share the same hardware but just two differently configered links to differentiate)

Anyone still has these available?

Thanks & Best regards!

User avatar
clintrubber
Breadboard Brother
Information
Posts: 99
Joined: 08 Oct 2008, 19:21
Location: The Netherlands
Has thanked: 16 times
Been thanked: 5 times
Contact:

Post by clintrubber »

Solved, the friendly people of britishaudioservice came to the rescue.

Bye!

User avatar
french22
Information
Posts: 1
Joined: 17 Mar 2013, 06:05

Post by french22 »

Good morning

Sorry to revive à so old thread.

I am looking for the service manual of the TE GP7SM130. The old one I have is out of order and a friend of mine can repair it but would be more at ease with some support documentation.

I was able to find out the GP7SM300 service manual but not the 130. British Audio Service doesn't seem to have it online.

Thanks a lot for your help

User avatar
deltafred
Opamp Operator
Information
Posts: 1654
Joined: 06 Apr 2010, 16:16
Location: England
Has thanked: 813 times
Been thanked: 306 times

Post by deltafred »

I seem to remember that the 130/150 is the same PCB as the 300 but with only 2 output transistors fitted instead of 4.
Politics is the art of so plucking the goose as to obtain the most feathers with the least squawking. - R.G. 2011
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012

Post Reply