How To Prove That I Am Not Biffa?

Anything non-technical you want to talk about, talk it over and have beer ...

Re: How To Prove That I Am Not Biffa?

Postby deltafred » 16 Sep 2015, 18:31

DrNomis wrote:but, it was only them trying to wind me up just for fun....

Now who would do a thing like that Simon? :lol:
Politics is the art of so plucking the goose as to obtain the most feathers with the least squawking. - R.G. 2011
Jeez, she's an ugly bastard, she makes my socks hurt. I hope it's no ones missus here. - Ice-9 2012
User avatar
deltafred
Opamp Operator
 
Posts: 1377
Joined: 06 Apr 2010, 17:16
Location: Yorkshire, England, UK
Has thanked: 296 times
Have thanks: 238 times

Re: How To Prove That I Am Not Biffa?

Postby DrNomis » 16 Sep 2015, 18:52

deltafred wrote:
DrNomis wrote:but, it was only them trying to wind me up just for fun....

Now who would do a thing like that Simon? :lol:



Lol.... :lol:


Maybe someone masquerading as my evil twin brother of no relation, he's a very devious fellow I tell you, one of these days I'll give him a piece of my mind.... :lol:


OTOH...he may be an alter-ego of myself that I'm totally unaware of, maybe that explains those weird gaps in time that I've been noticing lately, and here I was thinking I'd regained my insanity...... :lol:
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
User avatar
DrNomis
Old Solderhand
 
Posts: 6856
Joined: 16 Jul 2009, 05:56
Location: Darwin,Northern Territory Australia
Has thanked: 123 times
Have thanks: 384 times

Re: How To Prove That I Am Not Biffa?

Postby chimbono1 » 16 Sep 2015, 21:04

to dr.normis I've had a hard time doing my own pcbs Some are ok(plain etching in ferrite solution),some aren't I just thought,with some of his circuits being really useful,it'd be nice to get a tailor made board,and go from there?
User avatar
chimbono1
 
Posts: 10
Joined: 12 Sep 2015, 20:41
Has thanked: 0 time
Have thanks: 0 time

Re: How To Prove That I Am Not Biffa?

Postby chimbono1 » 16 Sep 2015, 21:08

i normally do my pedals point2point,reading the circuits and building as i go along Doesn't work so well when the circuits have multiple chips,etc..?
User avatar
chimbono1
 
Posts: 10
Joined: 12 Sep 2015, 20:41
Has thanked: 0 time
Have thanks: 0 time

Re: How To Prove That I Am Not Biffa?

Postby DrNomis » 16 Sep 2015, 23:00

chimbono1 wrote:to dr.normis I've had a hard time doing my own pcbs Some are ok(plain etching in ferrite solution),some aren't I just thought,with some of his circuits being really useful,it'd be nice to get a tailor made board,and go from there?




Since I'm out of press n peel film, etchant, and un-etched fibreglass pcb, I tend to just use Vero for my builds.... :thumbsup
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
User avatar
DrNomis
Old Solderhand
 
Posts: 6856
Joined: 16 Jul 2009, 05:56
Location: Darwin,Northern Territory Australia
Has thanked: 123 times
Have thanks: 384 times

Re: How To Prove That I Am Not Biffa?

Postby chimbono1 » 17 Sep 2015, 07:01

me too! just use a vero board to hang it on,and try to be as ergonomical as poss?
User avatar
chimbono1
 
Posts: 10
Joined: 12 Sep 2015, 20:41
Has thanked: 0 time
Have thanks: 0 time

Re: How To Prove That I Am Not Biffa?

Postby DrNomis » 30 Sep 2015, 06:57

chimbono1 wrote:me too! just use a vero board to hang it on,and try to be as ergonomical as poss?



When I do a vero layout I try to get the layout to follow the schematic, that way you can trace through the circuit when you do any troubleshooting, also, if you break the circuit up into smaller chunks in your mind and then deal with each chunk at a time that makes laying out the circuit easier..... :thumbsup
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
User avatar
DrNomis
Old Solderhand
 
Posts: 6856
Joined: 16 Jul 2009, 05:56
Location: Darwin,Northern Territory Australia
Has thanked: 123 times
Have thanks: 384 times

Re: How To Prove That I Am Not Biffa?

Postby chimbono1 » 05 Oct 2015, 00:32

makes sense? :)
i end up looping wires thru this and that,under the board,etc...
They don't look pretty,but sound ok?
User avatar
chimbono1
 
Posts: 10
Joined: 12 Sep 2015, 20:41
Has thanked: 0 time
Have thanks: 0 time

Previous

Return to Freestomp Café!

Who is online

Users browsing this forum: No registered users and 3 guests