Page 1 of 1

Anyone Want to make me a PCB?

PostPosted: 14 Apr 2017, 16:44
by Motter
I'm planning to make an Echo-matic, but I think this PCB is starting to get a little too complex for me to fake it with perfboard. I don't really have a setup to make PCBs (and kind of don't want to get into that hobby), so I was hoping someone with an etching setup might be able to help me out. I'll obviously pay you for your time/materials. The PCB transfer is at the bottom of this page:

Image

Re: Anyone Want to make me a PCB?

PostPosted: 14 Apr 2017, 18:25
by Motter
Here is a cleaner trace of the PCB (for 600 dpi resolution). Depending on your method for transfer it may need to be reversed/rotated/etc

Image

Re: Anyone Want to make me a PCB?

PostPosted: 14 Apr 2017, 18:36
by YellowBoy
Paul?

I made a vero layout http://guitar-fx-layouts.42897.x6.nabble.com/Boscorelli-Echomatic-DIY-Tape-Delay-Build-Report-td32584.html when the mate made one. He etched his own but I drew a vero just in case. Unverified but should be good to go.

It's Ciaran by the way :thumbsup

Re: Anyone Want to make me a PCB?

PostPosted: 14 Apr 2017, 18:44
by Motter
Who is paul? Anyway, that vero looks good if I can't find someone to etch me a board. Thanks :thumbsup

Re: Anyone Want to make me a PCB?

PostPosted: 14 Apr 2017, 18:48
by YellowBoy
Thought you were some else sorry.

Good luck

Re: Anyone Want to make me a PCB?

PostPosted: 14 Apr 2017, 18:53
by Motter
No worries. Happy Friday! I love vero for some things (I've made dozens of vero fuzzes), just hoping to try a pcb for this one.