[Eagle] how to get info box?
- RnFR
- Old Solderhand
Information
anyone know how to get the info box with the date, name, rev, product, etc.? i can't seem to figure it it out for the life of me. is it something that the free version doesn't have?
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- RnFR
- Old Solderhand
Information
well thanks for the guess, but that's not gonna get me very far.madbean wrote:I think you get it from a ULP.
anyone else know the trick?
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- marshmellow
- Cap Cooler
Either use the frames.lbr library. Or build the functionality yourself.
There are the following placeholder keywords, maybe more, I don't know:
>DRAWING_NAME
>LAST_DATE_TIME
>PLOT_DATE_TIME
>SHEETNR
>SHEETS
>SHEET
Just place a text in the schematic and insert one of those placeholders.
Eagle will automatically update the text.
There are the following placeholder keywords, maybe more, I don't know:
>DRAWING_NAME
>LAST_DATE_TIME
>PLOT_DATE_TIME
>SHEETNR
>SHEETS
>SHEET
Just place a text in the schematic and insert one of those placeholders.
Eagle will automatically update the text.
- RnFR
- Old Solderhand
Information
thanks so much! now, how exactly do i go about inserting placeholders?
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO
- marshmellow
- Cap Cooler
I thought that was clear enough .
Just place a text in the schematic, it's the T symbol in the toolbar, or type "text".
Then type in any of the keywords and press OK.
Just place a text in the schematic, it's the T symbol in the toolbar, or type "text".
Then type in any of the keywords and press OK.
- RnFR
- Old Solderhand
Information
it was! i think i am making it out to be more complicated than it is. thanks again!
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic
Blog-APOCALYPSE AUDIO
Blog-APOCALYPSE AUDIO