Do-It-Yourself Layout Creator [open-source] [link]
- bancika
- Resistor Ronker
thanks, I found what I f'd up. will be fixed in 3.18
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- bancika
- Resistor Ronker
Dr Tony, can you try the latest 3.18? I don't have a mac to test, but it should work now.
tnx
tnx
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- Dr Tony Balls
- Diode Debunker
did you zip it in a different way than before? Im having problems unzipping it.
- bancika
- Resistor Ronker
looks like the zip got corrupted somehow. I reuploaded
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- Dr Tony Balls
- Diode Debunker
Nah, i still only get the "recently used" items.
Let me ask you this, id the new OSX version all inclusive or does it need a separate folder full of shapes etc like the regular version had? I've deleted all older version of DIYLC and im just using the OSX version.
Let me ask you this, id the new OSX version all inclusive or does it need a separate folder full of shapes etc like the regular version had? I've deleted all older version of DIYLC and im just using the OSX version.
- bancika
- Resistor Ronker
it's all inclusive. Damn, I'll have to debug again and figure out a problem How bout the multi-platform version, does that work on OSX?
Until then 3.16 is the last version that works on OSX.
Until then 3.16 is the last version that works on OSX.
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- Dr Tony Balls
- Diode Debunker
Yeah the multiplatform version works great. Using the .jar file, too. It doesnt transfer my component templates, though. Is there a way to do that?
- bancika
- Resistor Ronker
you mean transfer between the old and new version? If so, just copy config.xml from the old installation dir to the new one.
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Is it possible to add the feature to place the text field in reverse (inverted)?
- bancika
- Resistor Ronker
for PCB artwork?
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Yes Sirbancika wrote:for PCB artwork?
- bancika
- Resistor Ronker
ah ok, that would require more changes because regular text doesn't get exported to toner transfer output. This would probably go as a new component. Can you file a request on diylc.org? That way I won't forget and you'll be notified on email when it's resolved.
that's generally preferred way of handling requests, everybody, please file them, it's easier for everyone
tnx
that's generally preferred way of handling requests, everybody, please file them, it's easier for everyone
tnx
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- bancika
- Resistor Ronker
Dr Tony, could you please check out 3.19? I hope I have fixed the dedicated mac build now.
Also, sinner, you got your mirrored text for PCB
Also, sinner, you got your mirrored text for PCB
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- Dr Tony Balls
- Diode Debunker
Seems to work well!!! Thanks Bane.
- bancika
- Resistor Ronker
fixed the problem with saving component templates and config. Grab the latest version
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- sinner
- Old Solderhand
Information
- Posts: 4709
- Joined: 06 Nov 2008, 17:16
- Location: ...no more
- Has thanked: 1031 times
- Been thanked: 909 times
Now it works great I didn't want to excruciate you with this, as I know you have an social life too And I could live with that
You're one and only Bane
You're one and only Bane
- bancika
- Resistor Ronker
Ok, I need to take a break, too much stuff done in the last couple of days
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
- bancika
- Resistor Ronker
I'm afraid not. Java for android is not the same, so I'd have to rewrite most of the code to retrofit it to Android.
I planned to do it, even started prep work, but don't have enough time to finish.
I planned to do it, even started prep work, but don't have enough time to finish.
The new version of DIY Layout Creator is out, check it out - https://github.com/bancika/diy-layout-creator
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
Check out my site with DIY gutars, amps and pedals http://diy-fever.com
I really appreciate the reply. I just started using DIYLC a few weeks ago after a couple years of farting around with Eagle. I really dig it! Much easier to whip together a layout when using on board pots since it is using pad per hole measurements.bancika wrote:I'm afraid not. Java for android is not the same, so I'd have to rewrite most of the code to retrofit it to Android.
I planned to do it, even started prep work, but don't have enough time to finish.
My desktop is connected to a monitor and is also used by my Roku. When the wife or kid is watching a show I can't use my desktop. In the meantime, I think I'll use Air Display and a wireless keyboard/mouse combo. It's when I'm away from home that having a mobile version would be cool, but now that Windows 8 is out this might be a reality sooner than later.
Really cool software. I plan on donating once my eBay funds clear Paypal's hold period.