Change position of inverting pin for opamp in EagleCAD

Digital tools for electronic work: software for pcb design, schematic drawing, circuit simulation, parts inventory tools, ...
Post Reply
User avatar
fishfude
Breadboard Brother
Information
Posts: 65
Joined: 14 Mar 2012, 20:18
Has thanked: 37 times

Post by fishfude »

Hiya folks,

I'm completely frustrated trying to change an LM741 opamp schematic symbol in EagleCAD, so that the inverting pin is at the top and the non-inverting at the bottom. The default is the other way round. I've tried 'gateswap' and 'pinswap' and editing in 'Open Symbol' (which I can edt in but not seem able to save).

Any help is greatly appreciated.

Cheers,

ff

User avatar
jubal81
Breadboard Brother
Information
Posts: 94
Joined: 01 Apr 2011, 01:29
Has thanked: 50 times
Been thanked: 30 times

Post by jubal81 »

Did you try 'mirror' and then rotate it?

User avatar
astrobass
Cap Cooler
Information
Posts: 548
Joined: 02 Mar 2013, 01:30
Has thanked: 42 times
Been thanked: 74 times

Post by astrobass »

Yeah just mirror it. No need to do anything weird to the library files.

User avatar
Intripped
Cap Cooler
Information
Posts: 670
Joined: 25 Aug 2009, 01:03
Location: Italy
Has thanked: 985 times
Been thanked: 305 times

Post by Intripped »

Tip: to mirror any object just click the scroll wheel button

User avatar
astrobass
Cap Cooler
Information
Posts: 548
Joined: 02 Mar 2013, 01:30
Has thanked: 42 times
Been thanked: 74 times

Post by astrobass »

Intripped wrote:Tip: to mirror any object just click the scroll wheel button
Or right click it and select mirror, or click on the toolbar icon had looks like a capital E with a vertical line between it and a mirrored capital E and click each thing you want to mirror.

User avatar
Intripped
Cap Cooler
Information
Posts: 670
Joined: 25 Aug 2009, 01:03
Location: Italy
Has thanked: 985 times
Been thanked: 305 times

Post by Intripped »

or you can write "mirror" in the command line and press ENTER and then click on the objects you want to mirror

...just for completeness :)

Post Reply