Vector-based software templates (for stompboxes)

Digital tools for electronic work: software for pcb design, schematic drawing, circuit simulation, parts inventory tools, ...
User avatar
bengke
Information
Posts: 6
Joined: 17 Sep 2009, 01:50
Has thanked: 2 times

Post by bengke »

lucky me :applause: :applause:

nice thread, very usefull :applause: :applause:

User avatar
Seiche
Old Solderhand
Information
Posts: 2526
Joined: 01 Nov 2010, 00:16
Location: Germany
Has thanked: 231 times
Been thanked: 189 times

Post by Seiche »

Hey I just stumbled upon this, it looks like you can't fit batteries under the 3pdt switches on the B enclosures. Is this correct?

User avatar
Mr. G.
Resistor Ronker
Information
Posts: 384
Joined: 03 Jul 2008, 19:32
my favorite amplifier: Undecided
Completed builds: 3-loop + tuner out TB loop pedal
Eternity overdrive (Deaj perf layout)
YATS (many)
BOR
DLS
COT (Briggs mods)
Crunchbox
SHO (several)
Fuzz Factory
Several LM386 based distortions
Location: Nova Scotia, Canada
Has thanked: 1 time
Been thanked: 9 times

Post by Mr. G. »

Seiche wrote:Hey I just stumbled upon this, it looks like you can't fit batteries under the 3pdt switches on the B enclosures. Is this correct?
If you're asking about my components.pdf layouts, then no, I don't have them setup for battery use, as I don't use them. Anyone could easily adjust the file for more room if needed. It's just a matter of opening the PDF in a vector based graphics program (Inkscape is a good and free program for this), and move the components around to wherever you want.

User avatar
Seiche
Old Solderhand
Information
Posts: 2526
Joined: 01 Nov 2010, 00:16
Location: Germany
Has thanked: 231 times
Been thanked: 189 times

Post by Seiche »

okay, just wanted to get a confirmation that i assumed correctly, thanks! :thumbsup
Nevertheless that PDF file is really cool, and as I have Inkscape, it shouldn't be a problem modifying it for my needs :)

Post Reply