4-Loop Effect Switcher w/Tuner Out & Master Bypass

All frequent questions on switching: true or not true bypass, transistor-based or mechanical.
Post Reply
User avatar
caspercody
Resistor Ronker
Information
Posts: 388
Joined: 15 Jul 2009, 14:34
Has thanked: 34 times
Been thanked: 48 times

Post by caspercody »

Does anyone have a schematic of something like this? I know how to wire up the 4 loop station, but curious of the master bypass and tuner wiring. Found this at:

http://www.loop-master.com/index.php

Thanks
Rob

User avatar
caspercody
Resistor Ronker
Information
Posts: 388
Joined: 15 Jul 2009, 14:34
Has thanked: 34 times
Been thanked: 48 times

Post by caspercody »

Never mind I found it. Here is the web page, if anyone is interested:

http://www.singlecoil.com/tb-strip/tbstrip.html

Scroll down about half way and click on the HERE.

Thanks
Rob

User avatar
HydrozeenElectronics
Resistor Ronker
Information
Posts: 268
Joined: 11 Feb 2009, 00:56
my favorite amplifier: Marshall JCM 800 4210
Location: Vancouver Washington
Has thanked: 1 time
Contact:

Post by HydrozeenElectronics »

caspercody wrote:Does anyone have a schematic of something like this? I know how to wire up the 4 loop station, but curious of the master bypass and tuner wiring. Found this at:

http://www.loop-master.com/index.php

Thanks
Rob

just my two cents but I think "Tuner Outs" are highly over rated. Most floor tuners have a mute function anyway. I built one into my looper and it never gets used. I wish I would have added another loop instead.

Post Reply