Tonebender MKII low volume

Forum dedicated to helping people debug and troubleshoot non-functional pedals or builds. Please use an clear and informative title, indicating circuit and basic problem. Don't forget to mark the issue as fixed if this is the case.
Post Reply
User avatar
rosetta
Information
Posts: 43
Joined: 26 May 2009, 05:47
Has thanked: 4 times
Been thanked: 2 times

Post by rosetta »

I just finished two pcb, one is a fuzz face with some mods, and the other is a tonebender MKII, for this one I tryed two differents pcb (Pidegeon FX and fuzzcentral), both sound awsome, but the both MKII have the same problem, at least for me, the volume is very low compared with the fuzz face and some other fuzz I have, so the question is, Is there any way to make it louder?. :?

by the way i use the marshall superfuzz for both.

Cheers.
Top
User avatar
beedotman
Diode Debunker
Information
Posts: 840
Joined: 28 Jun 2010, 10:24
Has thanked: 402 times
Been thanked: 394 times
Contact:
Contact beedotman

Post by beedotman »

You can increase 470R resistor to 820R or 1K.
Top
User avatar
rosetta
Information
Posts: 43
Joined: 26 May 2009, 05:47
Has thanked: 4 times
Been thanked: 2 times

Post by rosetta »

thank. I tryed different resistor finaly i take 1.5k

thanks bee.
Top
Post Reply

Return to “Pedal Debugging & Troubleshooting Support”