Rubber feet just... fall off

Collection of answers to the basic questions of stompbox building.

Rubber feet just... fall off

Postby bishop vogue » 17 Nov 2014, 00:19

I've done dozens of builds now, but one thing I still can't do well at all is getting rubber feet to actually stick to the bottom of my enclosures. After I paint and clear coat, I usually attach the little transparent feet that are designed as bumpers, but they always fall off. What do you guys do for feet? :scratch:
bishop vogue
Posts: 1
Joined: 17 Nov 2014, 00:15
Has thanked: 0 time
Have thanks: 0 time

Re: Rubber feet just... fall off

Postby Crowella » 17 Nov 2014, 00:24

I've had no issue with using the 3M adhesive brand feet, even after finishing. I'd say add a tiny bit of epoxy and/or gently scuff up the area where you are putting the feet just to give the adhesive more to hold onto. Hmm... :hmmm:
Degoop Doctor
Posts: 27
Joined: 29 Jul 2009, 09:23
Location: Central Coast, NSW, Aus
Has thanked: 6 times
Have thanks: 7 times

Re: Rubber feet just... fall off

Postby Duckman » 17 Nov 2014, 04:39

Same here... 3M is the thing and not a problem 'till today.
But -and at risk of being obvious- consider that if you or somebody else will use Velcro at the bottom, rubber feets are a waste.
User avatar
Opamp Operator
Posts: 1526
Joined: 20 May 2009, 02:45
Has thanked: 364 times
Have thanks: 121 times

Re: Rubber feet just... fall off

Postby tonyharker » 17 Nov 2014, 11:40

Super (Crazy) glue ?? :)
Posts: 33
Joined: 23 Jun 2011, 22:50
Has thanked: 5 times
Have thanks: 7 times

Re: Rubber feet just... fall off

Postby FiveseveN » 17 Nov 2014, 12:51

There are rubber feet that are designed to be attached with screws, which can be the same screws that keep the lid on, though may need to be a bit longer than the ones that come with the box. For Velcro users and such they are easy to remove.
Kind of like these, but smaller: ... x8wl25EjQD
Ignorance more frequently begets confidence than does knowledge. (Charles Darwin)
User avatar
Resistor Ronker
Posts: 390
Joined: 25 Oct 2009, 22:20
Location: Romania
Has thanked: 109 times
Have thanks: 41 times

Re: Rubber feet just... fall off

Postby ljn » 30 Nov 2014, 18:47

tonyharker wrote:Super (Crazy) glue ?? :)

If you really intend for them to stay on, the yes. Super glue works great. I used some for my fuzzrite clone. For the actual rubber feet, I cut four little square pieces of rubber that I found in an old radio. They haven't came loose yet.
Education is 10% knowledge and 90% brainwashing. We're only told what they want us to know. The rest is fabrication in it's purest form.
Solder Soldier
Posts: 221
Joined: 29 Nov 2014, 01:48
Location: United States
Has thanked: 14 times
Have thanks: 8 times

Return to Stompbox Builder's FAQs & How To's

Who is online

Users browsing this forum: No registered users and 1 guest