GuitarPCB Paramix - Vero Layout

Stompboxes circuits published in magazines, books or on DIY electronics websites.
Post Reply
User avatar
leopologhost
Information
Posts: 3
Joined: 23 Dec 2010, 18:24
Has thanked: 4 times

Post by leopologhost »

a poorly drawn vero layout for this powerful blender/mixer with phase correction. i left out the killswitch and the pot for dry gain because they seemed redundant.
this layout is not verified atm.
Image


source with schematic: http://www.guitarpcb.com/PDF%20Files/ParaMix%20v4.pdf

User avatar
leopologhost
Information
Posts: 3
Joined: 23 Dec 2010, 18:24
Has thanked: 4 times

Post by leopologhost »

i've noticed a missing cut already, will update the layout asap

User avatar
sorvillo
Information
Posts: 1
Joined: 17 May 2017, 06:37

Post by sorvillo »

leopologhost wrote:i've noticed a missing cut already, will update the layout asap
have you updated now? :D

User avatar
andrea83
Information
Posts: 4
Joined: 24 Jan 2017, 09:10
Has thanked: 2 times
Been thanked: 1 time

Post by andrea83 »

Hi everybody!
I made a vero for the Paramix before finding this one.
Hope you can give an eye to see if it's alright and I hope it can be useful to anyone!

I left out the kill switch and the 330n caps are the ones you can put higher (even 470nF or more) for bassists. Guitarists can use 220nF for all caps.
Thank you

Image

andrea

User avatar
andrea83
Information
Posts: 4
Joined: 24 Jan 2017, 09:10
Has thanked: 2 times
Been thanked: 1 time

Post by andrea83 »

Image

User avatar
andrea83
Information
Posts: 4
Joined: 24 Jan 2017, 09:10
Has thanked: 2 times
Been thanked: 1 time

Post by andrea83 »

andrea83 wrote:[ Image ]
Now it's VERIFIED!

Post Reply