simple buffer/booster

Stompboxes circuits published in magazines, books or on DIY electronics websites.

simple buffer/booster

Postby lucas26 » 03 Jul 2017, 20:26

hello,
i was looking for a simple buffer/boost and i did this. in spice it looks good, but i don't have my breadboard at this moment and i read somewhere that the switch could make a pop noise... is this schematic ok or do i need some improvement?

edit: i think this post should be in the workbench section. sorry
You do not have the required permissions to view the files attached to this post.
User avatar
lucas26
 
Posts: 7
Joined: 15 Jul 2012, 02:25
Location: Argentina
Has thanked: 2 times
Have thanks: 0 time

Re: simple buffer/booster

Postby FiveseveN » 03 Jul 2017, 21:56

It probably would pop since for a few ms the feedback would be floating. Solution is to simply short the pot for buffer mode. I.e. just use a SPST, excluding pin 1 of the depicted switch and connecting the pot at pin 2.
Ignorance more frequently begets confidence than does knowledge. (Charles Darwin)

For this message the author FiveseveN has received thanks: 2
DarkRain (27 Sep 2017, 11:41), lucas26 (04 Jul 2017, 19:04)
User avatar
FiveseveN
Resistor Ronker
 
Posts: 398
Joined: 25 Oct 2009, 22:20
Location: Romania
Has thanked: 117 times
Have thanks: 45 times


Return to DIY Stompbox designs

Who is online

Users browsing this forum: No registered users and 2 guests