LC-1 Eq for Lackland Bass [schematic]
- rcustoms
- Resistor Ronker
Information
This eq is a new electronics for some model from esp guitars and lakland basses
USA55-69tetsuya
the preamp - eq schematics based on lc-1
layout and parts
thanks to our friend ken for his interpretation and drawings
more info
USA55-69tetsuya
the preamp - eq schematics based on lc-1
layout and parts
thanks to our friend ken for his interpretation and drawings
more info
- chicago_mike
- Tube Twister
Skyline FX 2013
- rcustoms
- Resistor Ronker
Information
here a picture
sound very good , work ok few components, work horse
sound very good , work ok few components, work horse
- chicago_mike
- Tube Twister
Nice!
Skyline FX 2013
- rcustoms
- Resistor Ronker
Information
looks awesome men, good jobdomdec314 wrote:Here's my work-in-progress:
I'll hopefully finish it later tonight.
- chicago_mike
- Tube Twister
NICE!!!!!!
Skyline FX 2013
- george giblet
- Resistor Ronker
Interestingly I can't get the circuit to match the frequency response graph in the PDF, especially for bass and treble.
Also the Treble response in the graph shows a peaking behaviour which symmetrical, ie. boost-cut are a mirror image.
However, the way the circuit is drawn, with C7 across the opamp, the circuit cannot have this type of treble response. What you get is peaking for a boost setting but more cut at high frequencies for the cut setting; so it's not a symmetrical boost-cut response.
Also the Treble response in the graph shows a peaking behaviour which symmetrical, ie. boost-cut are a mirror image.
However, the way the circuit is drawn, with C7 across the opamp, the circuit cannot have this type of treble response. What you get is peaking for a boost setting but more cut at high frequencies for the cut setting; so it's not a symmetrical boost-cut response.