HSH Strat Tone Pot Wiring help! S-1/Super switch question!

Pickups, wiring schemes, switch techniques and onboard active electronics for guitars and basses
Post Reply
User avatar
sherminator19
Information
Posts: 1
Joined: 14 Jan 2015, 20:26

Post by sherminator19 »

So, I just ordered a new set of pickups, and was hoping to put them into my 2003 Am. Series Strat with the following wiring: https://dl.dropboxusercontent.com/u/744 ... S-1-SD.jpg

However I have 2 tone pots so I'd like to have one tone pot for each of the humbuckers, and no tone control for the single coil.

Also, I'd like to reverse the operation of the S1 switch (so what it does when up in that diagram, it would do when down in my guitar). For this, would I simply have to swap the connections either side of the common pins on the 4PDT? i.e. swap the connections at 1 and 3, 4 and 6, 7 and 9, and 10 and 12?

Could anyone help me out with modifying this? I've done regular strat wiring before but the super switch and S1 confuse the hell out of me.

Thanks

Post Reply