Middle Freq. EQ Switch

Pickups, wiring schemes, switch techniques and onboard active electronics for guitars and basses
Post Reply
User avatar
mecmast
Breadboard Brother
Information
Posts: 51
Joined: 29 Aug 2008, 12:40
Has thanked: 6 times
Been thanked: 2 times

Post by mecmast »

Hi all,

i play a Fender Strat Standart with 3 knobs (volume,tone,tone) and i want to add a switch replacement of one the tone knobs that makes the mids higher and bright my sound.

i think about building a small pcb and using a 2 way switch. i am new at these works.
is there a circuit for this or anybody can help me?

thnx....

User avatar
TragicTravisty
Solder Soldier
Information
Posts: 188
Joined: 11 Aug 2008, 21:42

Post by TragicTravisty »

sounds like a bass cut. try a jag style bass cut. if you insist on a boost, do a treble booster with a lower cutoff frequency.

User avatar
mecmast
Breadboard Brother
Information
Posts: 51
Joined: 29 Aug 2008, 12:40
Has thanked: 6 times
Been thanked: 2 times

Post by mecmast »

treble boost sound more good to me. i think i'll do a treble booster. can you show me any samples or build pcb schematic etc. ?

User avatar
TragicTravisty
Solder Soldier
Information
Posts: 188
Joined: 11 Aug 2008, 21:42

Post by TragicTravisty »

try the dallas rangemaster, thats the classic one. or a boost with a bass cut, like the sho or something.

User avatar
mecmast
Breadboard Brother
Information
Posts: 51
Joined: 29 Aug 2008, 12:40
Has thanked: 6 times
Been thanked: 2 times

Post by mecmast »

i've found the dallas rangemaster schems. i think i'll do it. thnx for your help.

User avatar
TragicTravisty
Solder Soldier
Information
Posts: 188
Joined: 11 Aug 2008, 21:42

Post by TragicTravisty »

no problem. you could also experiment with a switch or something for a fullrange boost or fat boost or something...

Post Reply