[wta] steve morse schematic
- puppiesonacid
- Cap Cooler
- puppiesonacid
- Cap Cooler
its a push pull pot... I think I remember steve saying in one of his videos that it adds pickup 3 to any of the other pickup combo's depending on where the blade switch was set, although its mounted to a small pc board for easier/neater looking wiring. i have a couple other ebmm wiring diagrams too. I have one of thier "silent circuits" which i think is just a dummy coil or inductor to trick out the pickups, kinda like the dummy coil in the fender elite series electronics. I love ebmm guitars, great quality at a fair price. I havent been over on thier forums in a couple years but when i left, they were some of the best and most diplomatic chaps I had ever encountered on the net.
hope this helps...
puppiesonacid
hope this helps...
puppiesonacid
i quess not push pull cause it's 3 way switch. push pull in this attachment.puppiesonacid wrote:its a push pull pot... I think I remember steve saying in one of his videos that it adds pickup 3 to any of the other pickup combo's depending on where the blade switch was set, although its mounted to a small pc board for easier/neater looking wiring. i have a couple other ebmm wiring diagrams too. I have one of thier "silent circuits" which i think is just a dummy coil or inductor to trick out the pickups, kinda like the dummy coil in the fender elite series electronics. I love ebmm guitars, great quality at a fair price. I havent been over on thier forums in a couple years but when i left, they were some of the best and most diplomatic chaps I had ever encountered on the net.
hope this helps...
puppiesonacid
silent circuits like gibson hawk isn't it?
- puppiesonacid
- Cap Cooler
sorry, im retarded... completley forgot what i was looking at. yes its a toggle, 3pdt.
silent circuit, to knock out 60 cycle hum with singles/split buckers. i didnt know the nighthawks had something like that, i was only familiar with the ebmm circuit. the second toggle, 1PDT i think, adds the 3rd pickup to whatever the blade switch is on, something like that anyways....
silent circuit, to knock out 60 cycle hum with singles/split buckers. i didnt know the nighthawks had something like that, i was only familiar with the ebmm circuit. the second toggle, 1PDT i think, adds the 3rd pickup to whatever the blade switch is on, something like that anyways....
no, its not 3pdt but 3p3t (3-way with 3 pole), cmiiw.puppiesonacid wrote:sorry, im retarded... completley forgot what i was looking at. yes its a toggle, 3pdt.
silent circuit, to knock out 60 cycle hum with singles/split buckers. i didnt know the nighthawks had something like that, i was only familiar with the ebmm circuit. the second toggle, 1PDT i think, adds the 3rd pickup to whatever the blade switch is on, something like that anyways....
the 3p3t look different like ordinary.
any pics ebmm circuit?
you right about second toggle 1pdt.
- JiM
- Diode Debunker
Information
- Posts: 967
- Joined: 11 Mar 2008, 22:56
- Completed builds: Completed builds :
Proco Rat
MXR MicroAmp in a volume pedal
TubeDriver (w/ NoS russian tube and big muff tone contol) + Phase 45 (w/ univibe cap ratio)
Dallas Rangemaster (w/ noisy OC75, negative ground)
SubCaster tube booster (w/ NoS russian tube, PtP)
Hot Harmonics
Music From Outer Space SubCommander in progress
Crackle Not OK
Simple bass blender in a 1590A
Bazz Fuss with a photo-darlington - Location: France
- Has thanked: 70 times
- Been thanked: 66 times
- Contact:
But a simple SP3T will do, as there are only 3 wires connected to itteddybear wrote:no, its not 3pdt but 3p3t (3-way with 3 pole), cmiiw.
I only give negative feedback.