Out of phase now :(

Pickups, wiring schemes, switch techniques and onboard active electronics for guitars and basses
Post Reply
User avatar
Tom5150
Information
Posts: 22
Joined: 04 May 2008, 09:51
my favorite amplifier: 10W SE Valve Amp
Location: Wales, UK
Has thanked: 1 time
Contact:
Contact Tom5150

Post by Tom5150 »

Hey there guys,


Last weekend i took the super distortion out of my Warmoth Super strat, and put a Seymour JB in.

The neck and middle pickups are both Dimarzio HS-3's, with the inner coils wired together, so no coil tapping is possible or anything.


I think it must of been the different wiring which has coursed it, but now when i used position 4 on the selector switch, the bridge and middle pickups are now out of phase.

I just want to check before i do it (I cant do it untill i go home on thursday)

but do i just reverse the two wires from the bridge pickup?(again i have the inner coils soldered together)



Thanks
TG
Top
User avatar
RnFR
Old Solderhand
Information
Posts: 4879
Joined: 09 Jan 2008, 06:02
my favorite amplifier: Traynor YBA-III, Fender Super Six
Completed builds: custom fuzz.
Location: Inner Earth
Has thanked: 139 times
Been thanked: 133 times
Contact:
Contact RnFR

Post by RnFR »

you got it!
"You've converted me to Cubic thinking. Where do I sign up for the newsletter? I need to learn more about how I can break free from ONEism Death Math." - Soulsonic

Blog-APOCALYPSE AUDIO
Top
Post Reply

Return to “Electric Guitar/Bass Wiring”