- Make R4 something like 470k and move it to the + input of the opamp instead of the - input. You're now adding a DC component to the output signal of 5.6*Vb. While it's not clear how high Vb is it suggests that the DC level on the output will be at Va level (unable to go higher) all the time.
Dirk_Hendrik wrote:C2 can go to ground just as well.
Dirk_Hendrik wrote:The Tone stack components (C18 and the mid control) can go to ground provided you add a cap in between the 2nd opamp output and the tone stack. This would have my personal preference. Bring the master CCW connection to ground in that case as well.
Users browsing this forum: No registered users and 2 guests