Resistors: Can i just use 2w or 3w throughout?
Neurotic Noobie Multi part question: I notice that apparently most people use 1/4 watt or 1/2 watt resistors for most pedals, can i use 2w or 3w if i want instead? Also, can i use a Ceramic or Wirewound resistor when the original pedal called for metal-film or some other material? While i am at it can i over-rate the voltage on the caps throughout the pedal? Is there any reason why i can't just use 100 volt caps? In other words, can i just go bigger and more expensive in every direction as long as i adhere to the proper resistance and capacitance values? I realize more expenisive does not necessarily mean better sound but that is why i am asking . . . please help?
- DaveKerr
- Solder Soldier
Information
- Posts: 197
- Joined: 14 Mar 2010, 05:00
- my favorite amplifier: Ampeg M-15
Dynacord Preference 500 - Completed builds: Fuzz Face (2)
Tonebender MKII (3)
ROG Tri-Vibe
PAiA Ring Mod kit
Ring Mod based on Tim E schematic (2)
Rangemaster
CNO
ROG Splitter-Blender
Clari (Not) cubed deluxe - Location: Boston MA area
- Has thanked: 53 times
- Been thanked: 10 times
Yeah, go for it if that's what you've got handy. Good luck cramming them into one of madbean's tight layouts, but if you're using perf or vero just spread them out a bit and use a larger enclosure if needed.
... multiple LFO waveforms (saw up, saw down, triangle, square); a more flexible envelope with attack/release controls as well as inverted envelope. I am afraid it will have more knobs than the TGP annual convention - frequencycentral
- Hides-His-Eyes
- Tube Twister
Bigger rated resistors are far more inconvinient than bigger rated caps. 2W resistors will be pretty big. It's uncommon to even see people using 1/2W resistors, and 1/8W aren't uncommon.
Testing, testing, won too fwee
- DrNomis
- Old Solderhand
Information
- Posts: 6807
- Joined: 16 Jul 2009, 04:56
- my favorite amplifier: Self-Built Valve Amp Head :)
- Completed builds: Dallas Arbiter Fuzz Face,Tone Bender Professional Mk 3,Tone Bender 3-Knob,Baja BK Butler Tube Driver,Baja Real Tube Overdrive,Roger Mayer Octavia,EH Soul Preacher,Tech 21 XXL Distortion,MFOS Weird Sound Generator.
- Location: Darwin,Northern Territory Australia
- Has thanked: 98 times
- Been thanked: 279 times
Most Ceramic Wirewound resistors are usually low value types, rarely going above 4k7 in value....
Genius is not all about 99% perspiration, and 1% inspiration - sometimes the solution is staring you right in the face.-Frequencycentral.
- diagrammatiks
- Solder Soldier
vishay rwr80s.
they are smaller then 1/2 watt metal films.
they are smaller then 1/2 watt metal films.