how to read this layout?

Frequently asked question on the subject of designing, creating, producing printed boards, veroboards or perfboads and on point-to-point construction techniques.
Post Reply
User avatar
nokaster
Solder Soldier
Information
Posts: 153
Joined: 07 Oct 2007, 16:46
Contact:

Post by nokaster »

i'm a newbie... i'm sorry...

how should i hold my pots, to do a correct wiring with this layout:
https://s189.photobucket.com/albums/z93 ... uzz333.png

my understanding is that the lugs on a pot are 1, 2, 3 when the shaft is upwards and the lugs face the builder. is this correct?

and than i have to put the knowledge you'll give me in action on the layout...
how are the pots pictured on there? what is the order of the lugs?

if i get the standard numbering of the lugs right... and i know how to face the pots for that... combined with a numbering for this layout... i'll be done with this question for ever and i'll for ever know how the standard numbering is done and how igloo's layouts work!

thx for helping me out guys!!!

and sorry for this stupid question...


j.

User avatar
Jay
Information
Posts: 42
Joined: 17 Aug 2007, 03:04
Location: USA

Post by Jay »

You are looking at the bottom of the pots and
they are mumbered from left to right 3 2 1

User avatar
nokaster
Solder Soldier
Information
Posts: 153
Joined: 07 Oct 2007, 16:46
Contact:

Post by nokaster »

thank you very much jay!!!!

Post Reply